On Fri, 17 Jan 2020 at 03:58, Guenter Roeck <linux@xxxxxxxxxxxx> wrote:
>
> Hi Ken,
>
> SMBUSMASTER 0 is the CPU, so we have a match with the temperatures.
>
OK, thanks for that information.
>
> Both Vcore and Icore should be much less when idle, and higher under
> load. The data from the Super-IO chip suggests that it is a Nuvoton
> chip. Can you report its first voltage (in0) ? That should roughly
> match Vcore.
>
> All other data looks ok.
>
> Thanks,
> Guenter
Hi Guenter,
unfortunately I don't have any report of in0. I'm guessing I need some
module(s) which did not seem to do anything useful in the past.
All I have in the 'in' area is
nct6779-isa-0290
Adapter: ISA adapter
Vcore: +0.30 V (min = +0.00 V, max = +1.74 V)
in1: +0.00 V (min = +0.00 V, max = +0.00 V)
AVCC: +3.39 V (min = +0.00 V, max = +0.00 V) ALARM
+3.3V: +3.39 V (min = +0.00 V, max = +0.00 V) ALARM
in4: +1.90 V (min = +0.00 V, max = +0.00 V) ALARM
in5: +0.90 V (min = +0.00 V, max = +0.00 V) ALARM
in6: +1.50 V (min = +0.00 V, max = +0.00 V) ALARM
3VSB: +3.47 V (min = +0.00 V, max = +0.00 V) ALARM
Vbat: +3.26 V (min = +0.00 V, max = +0.00 V) ALARM
in9: +0.00 V (min = +0.00 V, max = +0.00 V)
in10: +0.32 V (min = +0.00 V, max = +0.00 V) ALARM
in11: +1.06 V (min = +0.00 V, max = +0.00 V) ALARM
in12: +1.70 V (min = +0.00 V, max = +0.00 V) ALARM
in13: +0.94 V (min = +0.00 V, max = +0.00 V) ALARM
in14: +1.84 V (min = +0.00 V, max = +0.00 V) ALARM
and at that point Vcore was reported as 1.41V (system idle)
ĸen
--
Also Spuke Zerothruster
(Finnegans Wake)
