This switches the intel_menlow driver to use deci_kelvin_to_celsius() and celsius_to_deci_kelvin() in <linux/temperature.h> instead of helpers in <linux/thermal.h>. This is preparation for centralizing the kelvin to/from Celsius conversion helpers in <linux/temprature.h>. Cc: Sujith Thomas <sujith.thomas@xxxxxxxxx> Cc: Darren Hart <dvhart@xxxxxxxxxxxxx> Cc: Andy Shevchenko <andy@xxxxxxxxxxxxx> Cc: Zhang Rui <rui.zhang@xxxxxxxxx> Cc: Eduardo Valentin <edubezval@xxxxxxxxx> Cc: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx> Cc: Amit Kucheria <amit.kucheria@xxxxxxxxxxxxx> Cc: Jean Delvare <jdelvare@xxxxxxxx> Cc: Guenter Roeck <linux@xxxxxxxxxxxx> Cc: Keith Busch <kbusch@xxxxxxxxxx> Cc: Jens Axboe <axboe@xxxxxx> Cc: Christoph Hellwig <hch@xxxxxx> Cc: Sagi Grimberg <sagi@xxxxxxxxxxx> Signed-off-by: Akinobu Mita <akinobu.mita@xxxxxxxxx> --- drivers/platform/x86/intel_menlow.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/platform/x86/intel_menlow.c b/drivers/platform/x86/intel_menlow.c index b102f6d..6313591 100644 --- a/drivers/platform/x86/intel_menlow.c +++ b/drivers/platform/x86/intel_menlow.c @@ -302,8 +302,10 @@ static ssize_t aux_show(struct device *dev, struct device_attribute *dev_attr, int result; result = sensor_get_auxtrip(attr->handle, idx, &value); + if (result) + return result; - return result ? result : sprintf(buf, "%lu", DECI_KELVIN_TO_CELSIUS(value)); + return sprintf(buf, "%ld", deci_kelvin_to_celsius(value)); } static ssize_t aux0_show(struct device *dev, @@ -332,8 +334,8 @@ static ssize_t aux_store(struct device *dev, struct device_attribute *dev_attr, if (value < 0) return -EINVAL; - result = sensor_set_auxtrip(attr->handle, idx, - CELSIUS_TO_DECI_KELVIN(value)); + result = sensor_set_auxtrip(attr->handle, idx, + celsius_to_deci_kelvin(value)); return result ? result : count; } -- 2.7.4
