On Thu, Sep 12, 2019 at 11:33:00AM +0000, Amy.Shih@xxxxxxxxxxxxxxxx wrote:
> From: "amy.shih" <amy.shih@xxxxxxxxxxxxxxxx>
>
> According to datasheet, the SMI status register setting of LTD
> temperature is SMI_STS3, and the SMI status register setting
> of fan is SMI_STS5 and SMI_STS6.
>
> Signed-off-by: amy.shih <amy.shih@xxxxxxxxxxxxxxxx>
Applied.
Thanks,
Guenter
> ---
> drivers/hwmon/nct7904.c | 11 +++++++++--
> 1 file changed, 9 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/hwmon/nct7904.c b/drivers/hwmon/nct7904.c
> index ce688ab4fce2..95b447cfa24c 100644
> --- a/drivers/hwmon/nct7904.c
> +++ b/drivers/hwmon/nct7904.c
> @@ -51,6 +51,7 @@
> #define VSEN1_HV_HL_REG 0x00 /* Bank 1; 2 regs (HV/LV) per sensor */
> #define VSEN1_LV_HL_REG 0x01 /* Bank 1; 2 regs (HV/LV) per sensor */
> #define SMI_STS1_REG 0xC1 /* Bank 0; SMI Status Register */
> +#define SMI_STS3_REG 0xC3 /* Bank 0; SMI Status Register */
> #define SMI_STS5_REG 0xC5 /* Bank 0; SMI Status Register */
> #define SMI_STS7_REG 0xC7 /* Bank 0; SMI Status Register */
> #define SMI_STS8_REG 0xC8 /* Bank 0; SMI Status Register */
> @@ -210,7 +211,7 @@ static int nct7904_read_fan(struct device *dev, u32 attr, int channel,
> return 0;
> case hwmon_fan_alarm:
> ret = nct7904_read_reg(data, BANK_0,
> - SMI_STS7_REG + (channel >> 3));
> + SMI_STS5_REG + (channel >> 3));
> if (ret < 0)
> return ret;
> *val = (ret >> (channel & 0x07)) & 1;
> @@ -351,7 +352,13 @@ static int nct7904_read_temp(struct device *dev, u32 attr, int channel,
> *val = sign_extend32(temp, 10) * 125;
> return 0;
> case hwmon_temp_alarm:
> - if (channel < 5) {
> + if (channel == 4) {
> + ret = nct7904_read_reg(data, BANK_0,
> + SMI_STS3_REG);
> + if (ret < 0)
> + return ret;
> + *val = (ret >> 1) & 1;
> + } else if (channel < 4) {
> ret = nct7904_read_reg(data, BANK_0,
> SMI_STS1_REG);
> if (ret < 0)
