Re: [PATCH v1 4/5] hwmon: (lm75) Create function from code to write into registers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 7/9/19 2:50 AM, Iker Perez wrote:
From: Iker Perez del Palomar Sustatxa <iker.perez@xxxxxxxxxxxxxxx>

This function will be needed later to configure update_interval

Signed-off-by: Iker Perez del Palomar Sustatxa <iker.perez@xxxxxxxxxxxxxxx>
---
  drivers/hwmon/lm75.c | 63 ++++++++++++++++++++++++++++++----------------------
  1 file changed, 36 insertions(+), 27 deletions(-)

diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index 1d4d060bd695..5ba7277dac69 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -78,6 +78,40 @@ static inline long lm75_reg_to_mc(s16 temp, u8 resolution)
  	return ((temp >> (16 - resolution)) * 1000) >> (resolution - 8);
  }
+static void lm75_remove(void *data)
+{
+	struct lm75_data *lm75 = data;
+	struct i2c_client *client = lm75->client;
+
+	i2c_smbus_write_byte_data(client, LM75_REG_CONF, lm75->orig_conf);
+}
+static int configure_reg(u8 set_mask, u8 clr_mask, struct lm75_data *data,
+		struct i2c_client *client)
+{
+	int status, err, new;
+	struct device *dev = &client->dev;
+
+	/* configure as specified */
+	status = i2c_smbus_read_byte_data(client, LM75_REG_CONF);
+	if (status < 0) {
+		dev_dbg(dev, "Can't read config? %d\n", status);
+		return status;
+	}
+	data->orig_conf = status;

Overwriting the "original" configuration each time the update time is changed
is really a bad idea.

You'll want to cache the current configuration register value, and not
re-read it each time the configuration is updated.


+	new = status & ~clr_mask;
+	new |= set_mask;
+	if (status != new)
+		i2c_smbus_write_byte_data(client, LM75_REG_CONF, new);
+
+	err = devm_add_action_or_reset(dev, lm75_remove, data);
+	if (err)
+		return err;
+

The function is a good idea, but you can't use devm_add_action_or_reset() here.
That will have to remain in the probe function. Otherwise an action will be added
each time the resolution/update time is changed.

+	dev_dbg(dev, "Config %02x\n", new);
+
+	return 0;
+}
+
  static int lm75_read(struct device *dev, enum hwmon_sensor_types type,
  		     u32 attr, int channel, long *val)
  {
@@ -238,14 +272,6 @@ static const struct regmap_config lm75_regmap_config = {
  	.use_single_write = true,
  };
-static void lm75_remove(void *data)
-{
-	struct lm75_data *lm75 = data;
-	struct i2c_client *client = lm75->client;
-
-	i2c_smbus_write_byte_data(client, LM75_REG_CONF, lm75->orig_conf);
-}
-
  static int
  lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
  {
@@ -253,9 +279,8 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
  	struct device *hwmon_dev;
  	struct lm75_data *data;
  	struct lm75_data device_data;
-	int status, err;
+	int status;
  	u8 set_mask, clr_mask;
-	int new;
data = &device_data;
  	if (client->dev.of_node)
@@ -370,23 +395,7 @@ lm75_probe(struct i2c_client *client, const struct i2c_device_id *id)
  		break;
  	}
- /* configure as specified */
-	status = i2c_smbus_read_byte_data(client, LM75_REG_CONF);
-	if (status < 0) {
-		dev_dbg(dev, "Can't read config? %d\n", status);
-		return status;
-	}
-	data->orig_conf = status;
-	new = status & ~clr_mask;
-	new |= set_mask;
-	if (status != new)
-		i2c_smbus_write_byte_data(client, LM75_REG_CONF, new);
-
-	err = devm_add_action_or_reset(dev, lm75_remove, data);
-	if (err)
-		return err;
-
-	dev_dbg(dev, "Config %02x\n", new);
+	status = configure_reg(set_mask, clr_mask, data, client);
hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
  							 data, &lm75_chip_info,





[Index of Archives]     [LM Sensors]     [Linux Sound]     [ALSA Users]     [ALSA Devel]     [Linux Audio Users]     [Linux Media]     [Kernel]     [Gimp]     [Yosemite News]     [Linux Media]

  Powered by Linux