On 7/9/19 2:50 AM, Iker Perez wrote:
From: Iker Perez del Palomar Sustatxa <iker.perez@xxxxxxxxxxxxxxx>
hwmon_chip needs to be allowed to be written because tmp75b's sample time
can be configured. Allowing hwmon_chip to be written will allow to
configure the update_interval from sysfs.
You'll want to have separate functions for the different sensor types,
and not fold it all into one. lm75_write() should be something like
static int lm75_write(struct device *dev, enum hwmon_sensor_types type,
u32 attr, int channel, long val)
{
switch(type) {
case hwmon_temp:
return lm75_write_temp(dev, attr, channel, val);
case hwmon_chip:
return lm75_write_chip(dev, attr, val);
default:
return -EINVAL;
}
}
Signed-off-by: Iker Perez del Palomar Sustatxa <iker.perez@xxxxxxxxxxxxxxx>
---
drivers/hwmon/lm75.c | 62 ++++++++++++++++++++++++++++++++--------------------
1 file changed, 38 insertions(+), 24 deletions(-)
diff --git a/drivers/hwmon/lm75.c b/drivers/hwmon/lm75.c
index 0209e0719784..80a11c33db77 100644
--- a/drivers/hwmon/lm75.c
+++ b/drivers/hwmon/lm75.c
@@ -128,34 +128,48 @@ static int lm75_write(struct device *dev, enum hwmon_sensor_types type,
u8 resolution;
int reg;
- if (type != hwmon_temp)
- return -EINVAL;
-
- switch (attr) {
- case hwmon_temp_max:
- reg = LM75_REG_MAX;
- break;
- case hwmon_temp_max_hyst:
- reg = LM75_REG_HYST;
- break;
- default:
- return -EINVAL;
+ switch (type) {
+ case hwmon_chip:
+ switch (attr) {
+ case hwmon_chip_update_interval:
+ if (data->kind == tmp75b)
+ pr_info("Iker inside write\n");
+ else
+ return -EINVAL;
+ break;
+ default:
+ return -EINVAL;
+ }
+ case hwmon_temp:
+ switch (attr) {
+ case hwmon_temp_max:
+ reg = LM75_REG_MAX;
+ break;
+ case hwmon_temp_max_hyst:
+ reg = LM75_REG_HYST;
+ break;
+ default:
+ return -EINVAL;
}
Please watch out for indentation. Running checkpatch over your patches
would be highly recommended.
Guenter
- /*
- * Resolution of limit registers is assumed to be the same as the
- * temperature input register resolution unless given explicitly.
- */
- if (data->resolution_limits)
- resolution = data->resolution_limits;
- else
- resolution = data->resolution;
+ /*
+ * Resolution of limit registers is assumed to be the same as the
+ * temperature input register resolution unless given explicitly.
+ */
+ if (data->resolution_limits)
+ resolution = data->resolution_limits;
+ else
+ resolution = data->resolution;
- temp = clamp_val(temp, LM75_TEMP_MIN, LM75_TEMP_MAX);
- temp = DIV_ROUND_CLOSEST(temp << (resolution - 8),
- 1000) << (16 - resolution);
+ temp = clamp_val(temp, LM75_TEMP_MIN, LM75_TEMP_MAX);
+ temp = DIV_ROUND_CLOSEST(temp << (resolution - 8),
+ 1000) << (16 - resolution);
- return regmap_write(data->regmap, reg, temp);
+ return regmap_write(data->regmap, reg, temp);
+ default:
+ return -EINVAL;
+ }
+ return 0;
}
static umode_t lm75_is_visible(const void *data, enum hwmon_sensor_types type,
