This patch fix a typo where build is used instead of built. Signed-off-by: Corentin Labbe <clabbe@xxxxxxxxxxxx> --- drivers/hwmon/Kconfig | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 532a0532d01b..100b7fce1412 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -179,7 +179,7 @@ config SENSORS_ADT7X10 This module contains common code shared by the ADT7310/ADT7320 and ADT7410/ADT7420 temperature monitoring chip drivers. - If build as a module, the module will be called adt7x10. + If built as a module, the module will be called adt7x10. config SENSORS_ADT7310 tristate "Analog Devices ADT7310/ADT7320" @@ -242,7 +242,7 @@ config SENSORS_ADT7475 ADT7473, ADT7475, ADT7476 and ADT7490 hardware monitoring chips. - This driver can also be build as a module. If so, the module + This driver can also be built as a module. If so, the module will be called adt7475. config SENSORS_ASC7621 @@ -666,7 +666,7 @@ config SENSORS_JZ4740 If you say yes here you get support for reading adc values from the ADCIN pin on Ingenic JZ4740 SoC based boards. - This driver can also be build as a module. If so, the module will be + This driver can also be built as a module. If so, the module will be called jz4740-hwmon. config SENSORS_JC42 @@ -1594,7 +1594,7 @@ config SENSORS_AMC6821 If you say yes here you get support for the Texas Instruments AMC6821 hardware monitoring chips. - This driver can also be build as a module. If so, the module + This driver can also be built as a module. If so, the module will be called amc6821. config SENSORS_INA209 -- 2.18.1
