On Mon, May 21, 2018 at 01:50:34PM -0700, Jae Hyun Yoo wrote:
> On 5/21/2018 1:42 PM, Guenter Roeck wrote:
> >On Mon, May 21, 2018 at 12:59:52PM -0700, Jae Hyun Yoo wrote:
> >>This commit adds PECI cputemp hwmon driver.
> >>
> >>Signed-off-by: Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>
> >>Reviewed-by: Haiyue Wang <haiyue.wang@xxxxxxxxxxxxxxx>
> >>Reviewed-by: James Feist <james.feist@xxxxxxxxxxxxxxx>
> >>Reviewed-by: Vernon Mauery <vernon.mauery@xxxxxxxxxxxxxxx>
> >>Cc: Alan Cox <alan@xxxxxxxxxxxxxxx>
> >>Cc: Andrew Jeffery <andrew@xxxxxxxx>
> >>Cc: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> >>Cc: Arnd Bergmann <arnd@xxxxxxxx>
> >>Cc: Jason M Biils <jason.m.bills@xxxxxxxxxxxxxxx>
> >>Cc: Joel Stanley <joel@xxxxxxxxx>
> >>Cc: Miguel Ojeda <miguel.ojeda.sandonis@xxxxxxxxx>
> >>Cc: Andrew Lunn <andrew@xxxxxxx>
> >>Cc: Stef van Os <stef.van.os@xxxxxxxxxxxxxxxxxxxxxxxxx>
> >>---
> >> drivers/hwmon/Kconfig | 14 ++
> >> drivers/hwmon/Makefile | 1 +
> >> drivers/hwmon/peci-cputemp.c | 407 +++++++++++++++++++++++++++++++++++
> >> drivers/hwmon/peci-hwmon.c | 124 +++++++++++
> >> drivers/hwmon/peci-hwmon.h | 51 +++++
> >> 5 files changed, 597 insertions(+)
> >> create mode 100644 drivers/hwmon/peci-cputemp.c
> >> create mode 100644 drivers/hwmon/peci-hwmon.c
> >> create mode 100644 drivers/hwmon/peci-hwmon.h
> >>
> >>diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> >>index f10840ad465c..8492586bb1e4 100644
> >>--- a/drivers/hwmon/Kconfig
> >>+++ b/drivers/hwmon/Kconfig
> >>@@ -1256,6 +1256,20 @@ config SENSORS_NCT7904
> >> This driver can also be built as a module. If so, the module
> >> will be called nct7904.
> >>+config SENSORS_PECI_CPUTEMP
> >>+ tristate "PECI CPU temperature monitoring support"
> >>+ depends on OF
> >>+ depends on PECI
> >>+ help
> >>+ If you say yes here you get support for the generic Intel PECI
> >>+ cputemp driver which provides Digital Thermal Sensor (DTS) thermal
> >>+ readings of the CPU package and CPU cores that are accessible using
> >>+ the PECI Client Command Suite via the processor PECI client.
> >>+ Check Documentation/hwmon/peci-cputemp for details.
> >>+
> >>+ This driver can also be built as a module. If so, the module
> >>+ will be called peci-cputemp.
> >>+
> >> config SENSORS_NSA320
> >> tristate "ZyXEL NSA320 and compatible fan speed and temperature sensors"
> >> depends on GPIOLIB && OF
> >>diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> >>index e7d52a36e6c4..d18b374a9000 100644
> >>--- a/drivers/hwmon/Makefile
> >>+++ b/drivers/hwmon/Makefile
> >>@@ -136,6 +136,7 @@ obj-$(CONFIG_SENSORS_NCT7802) += nct7802.o
> >> obj-$(CONFIG_SENSORS_NCT7904) += nct7904.o
> >> obj-$(CONFIG_SENSORS_NSA320) += nsa320-hwmon.o
> >> obj-$(CONFIG_SENSORS_NTC_THERMISTOR) += ntc_thermistor.o
> >>+obj-$(CONFIG_SENSORS_PECI_CPUTEMP) += peci-cputemp.o peci-hwmon.o
> >> obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
> >> obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
> >> obj-$(CONFIG_SENSORS_PCF8591) += pcf8591.o
> >>diff --git a/drivers/hwmon/peci-cputemp.c b/drivers/hwmon/peci-cputemp.c
> >>new file mode 100644
> >>index 000000000000..49c5a862bb58
> >>--- /dev/null
> >>+++ b/drivers/hwmon/peci-cputemp.c
> >>@@ -0,0 +1,407 @@
> >>+// SPDX-License-Identifier: GPL-2.0
> >>+// Copyright (c) 2018 Intel Corporation
> >>+
> >>+#include <linux/hwmon.h>
> >>+#include <linux/jiffies.h>
> >>+#include <linux/module.h>
> >>+#include <linux/of_device.h>
> >>+
> >>+#include "peci-hwmon.h"
> >>+
> >>+#define DEFAULT_CHANNEL_NUMS 4
> >>+#define CORETEMP_CHANNEL_NUMS CORE_NUMS_MAX
> >>+#define CPUTEMP_CHANNEL_NUMS (DEFAULT_CHANNEL_NUMS + CORETEMP_CHANNEL_NUMS)
> >>+
> >>+/* The RESOLVED_CORES register in PCU of a client CPU */
> >>+#define REG_RESOLVED_CORES_BUS 1
> >>+#define REG_RESOLVED_CORES_DEVICE 30
> >>+#define REG_RESOLVED_CORES_FUNCTION 3
> >>+#define REG_RESOLVED_CORES_OFFSET 0xB4
> >>+
> >>+struct temp_group {
> >>+ struct temp_data die;
> >>+ struct temp_data tcontrol;
> >>+ struct temp_data tthrottle;
> >>+ struct temp_data tjmax;
> >>+ struct temp_data core[CORETEMP_CHANNEL_NUMS];
> >>+};
> >>+
> >>+struct peci_cputemp {
> >>+ struct peci_client *client;
> >>+ struct device *dev;
> >>+ char name[PECI_NAME_SIZE];
> >>+ struct temp_group temp;
> >>+ u8 addr;
> >>+ uint cpu_no;
> >>+ const struct cpu_gen_info *gen_info;
> >>+ u32 core_mask;
> >>+ u32 temp_config[CPUTEMP_CHANNEL_NUMS + 1];
> >>+ uint config_idx;
> >>+ struct hwmon_channel_info temp_info;
> >>+ const struct hwmon_channel_info *info[2];
> >>+ struct hwmon_chip_info chip;
> >>+};
> >>+
> >>+enum cputemp_channels {
> >>+ channel_die,
> >>+ channel_tcontrol,
> >>+ channel_tthrottle,
> >>+ channel_tjmax,
> >>+ channel_core,
> >>+};
> >>+
> >>+static const u32 config_table[DEFAULT_CHANNEL_NUMS + 1] = {
> >>+ /* Die temperature */
> >>+ HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
> >>+ HWMON_T_CRIT_HYST,
> >>+
> >>+ /* Tcontrol temperature */
> >>+ HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_CRIT,
> >>+
> >>+ /* Tthrottle temperature */
> >>+ HWMON_T_LABEL | HWMON_T_INPUT,
> >>+
> >>+ /* Tjmax temperature */
> >>+ HWMON_T_LABEL | HWMON_T_INPUT,
> >>+
> >>+ /* Core temperature - for all core channels */
> >>+ HWMON_T_LABEL | HWMON_T_INPUT | HWMON_T_MAX | HWMON_T_CRIT |
> >>+ HWMON_T_CRIT_HYST,
> >>+};
> >>+
> >>+static const char *cputemp_label[CPUTEMP_CHANNEL_NUMS] = {
> >>+ "Die",
> >>+ "Tcontrol",
> >>+ "Tthrottle",
> >>+ "Tjmax",
> >>+ "Core 0", "Core 1", "Core 2", "Core 3",
> >>+ "Core 4", "Core 5", "Core 6", "Core 7",
> >>+ "Core 8", "Core 9", "Core 10", "Core 11",
> >>+ "Core 12", "Core 13", "Core 14", "Core 15",
> >>+ "Core 16", "Core 17", "Core 18", "Core 19",
> >>+ "Core 20", "Core 21", "Core 22", "Core 23",
> >>+};
> >>+
> >>+static s32 ten_dot_six_to_millidegree(s32 val)
> >>+{
> >>+ return ((val ^ 0x8000) - 0x8000) * 1000 / 64;
> >>+}
> >>+
> >>+static int get_temp_targets(struct peci_cputemp *priv)
> >>+{
> >>+ s32 tthrottle_offset;
> >>+ s32 tcontrol_margin;
> >>+ u8 pkg_cfg[4];
> >>+ int rc;
> >>+
> >>+ /**
> >>+ * Just use only the tcontrol marker to determine if target values need
> >>+ * update.
> >>+ */
> >>+ if (!peci_hwmon_need_update(&priv->temp.tcontrol))
> >>+ return 0;
> >>+
> >>+ rc = peci_hwmon_rd_pkg_cfg_cmd(priv->client->adapter, priv->addr,
> >>+ MBX_INDEX_TEMP_TARGET, 0, pkg_cfg);
> >>+ if (rc)
> >>+ return rc;
> >>+
> >>+ priv->temp.tjmax.value = pkg_cfg[2] * 1000;
> >>+
> >>+ tcontrol_margin = pkg_cfg[1];
> >>+ tcontrol_margin = ((tcontrol_margin ^ 0x80) - 0x80) * 1000;
> >>+ priv->temp.tcontrol.value = priv->temp.tjmax.value - tcontrol_margin;
> >>+
> >>+ tthrottle_offset = (pkg_cfg[3] & 0x2f) * 1000;
> >>+ priv->temp.tthrottle.value = priv->temp.tjmax.value - tthrottle_offset;
> >>+
> >>+ peci_hwmon_mark_updated(&priv->temp.tcontrol);
> >>+
> >>+ return 0;
> >>+}
> >>+
> >>+static int get_die_temp(struct peci_cputemp *priv)
> >>+{
> >>+ struct peci_get_temp_msg msg;
> >>+ int rc;
> >>+
> >>+ if (!peci_hwmon_need_update(&priv->temp.die))
> >>+ return 0;
> >>+
> >>+ msg.addr = priv->addr;
> >>+
> >>+ rc = peci_command(priv->client->adapter, PECI_CMD_GET_TEMP, &msg);
> >>+ if (rc)
> >>+ return rc;
> >>+
> >>+ /* Note that the tjmax should be available before calling it */
> >>+ priv->temp.die.value = priv->temp.tjmax.value +
> >>+ (msg.temp_raw * 1000 / 64);
> >>+
> >>+ peci_hwmon_mark_updated(&priv->temp.die);
> >>+
> >>+ return 0;
> >>+}
> >>+
> >>+static int get_core_temp(struct peci_cputemp *priv, int core_index)
> >>+{
> >>+ s32 core_dts_margin;
> >>+ u8 pkg_cfg[4];
> >>+ int rc;
> >>+
> >>+ if (!peci_hwmon_need_update(&priv->temp.core[core_index]))
> >>+ return 0;
> >>+
> >>+ rc = peci_hwmon_rd_pkg_cfg_cmd(priv->client->adapter, priv->addr,
> >>+ MBX_INDEX_PER_CORE_DTS_TEMP,
> >>+ core_index, pkg_cfg);
> >>+ if (rc)
> >>+ return rc;
> >>+
> >>+ core_dts_margin = le16_to_cpup((__le16 *)pkg_cfg);
> >>+
> >>+ /**
> >>+ * Processors return a value of the core DTS reading in 10.6 format
> >>+ * (10 bits signed decimal, 6 bits fractional).
> >>+ * Error codes:
> >>+ * 0x8000: General sensor error
> >>+ * 0x8001: Reserved
> >>+ * 0x8002: Underflow on reading value
> >>+ * 0x8003-0x81ff: Reserved
> >>+ */
> >>+ if (core_dts_margin >= 0x8000 && core_dts_margin <= 0x81ff)
> >>+ return -EIO;
> >>+
> >>+ core_dts_margin = ten_dot_six_to_millidegree(core_dts_margin);
> >>+
> >>+ /* Note that the tjmax should be available before calling it */
> >>+ priv->temp.core[core_index].value = priv->temp.tjmax.value +
> >>+ core_dts_margin;
> >>+
> >>+ peci_hwmon_mark_updated(&priv->temp.core[core_index]);
> >>+
> >>+ return 0;
> >>+}
> >>+
> >>+static int cputemp_read_string(struct device *dev,
> >>+ enum hwmon_sensor_types type,
> >>+ u32 attr, int channel, const char **str)
> >>+{
> >>+ if (attr != hwmon_temp_label)
> >>+ return -EOPNOTSUPP;
> >>+
> >>+ *str = cputemp_label[channel];
> >>+ return 0;
> >>+}
> >>+
> >>+static int cputemp_read(struct device *dev,
> >>+ enum hwmon_sensor_types type,
> >>+ u32 attr, int channel, long *val)
> >>+{
> >>+ struct peci_cputemp *priv = dev_get_drvdata(dev);
> >>+ int rc, core_index;
> >>+
> >>+ if (channel >= CPUTEMP_CHANNEL_NUMS ||
> >>+ !(priv->temp_config[channel] & BIT(attr)))
> >>+ return -EOPNOTSUPP;
> >>+
> >>+ rc = get_temp_targets(priv);
> >>+ if (rc)
> >>+ return rc;
> >>+
> >>+ switch (attr) {
> >>+ case hwmon_temp_input:
> >>+ switch (channel) {
> >>+ case channel_die:
> >>+ rc = get_die_temp(priv);
> >>+ if (rc)
> >>+ break;
> >>+
> >>+ *val = priv->temp.die.value;
> >>+ break;
> >>+ case channel_tcontrol:
> >>+ *val = priv->temp.tcontrol.value;
> >>+ break;
> >>+ case channel_tthrottle:
> >>+ *val = priv->temp.tthrottle.value;
> >>+ break;
> >>+ case channel_tjmax:
> >>+ *val = priv->temp.tjmax.value;
> >>+ break;
> >>+ default:
> >>+ core_index = channel - DEFAULT_CHANNEL_NUMS;
> >>+ rc = get_core_temp(priv, core_index);
> >>+ if (rc)
> >>+ break;
> >>+
> >>+ *val = priv->temp.core[core_index].value;
> >>+ break;
> >>+ }
> >>+ break;
> >>+ case hwmon_temp_max:
> >>+ *val = priv->temp.tcontrol.value;
> >>+ break;
> >>+ case hwmon_temp_crit:
> >>+ *val = priv->temp.tjmax.value;
> >>+ break;
> >>+ case hwmon_temp_crit_hyst:
> >>+ *val = priv->temp.tjmax.value - priv->temp.tcontrol.value;
> >>+ break;
> >>+ default:
> >>+ rc = -EOPNOTSUPP;
> >>+ break;
> >>+ }
> >>+
> >>+ return rc;
> >>+}
> >>+
> >>+static umode_t cputemp_is_visible(const void *data,
> >>+ enum hwmon_sensor_types type,
> >>+ u32 attr, int channel)
> >>+{
> >>+ const struct peci_cputemp *priv = data;
> >>+
> >>+ if (priv->temp_config[channel] & BIT(attr))
> >>+ if (channel < DEFAULT_CHANNEL_NUMS ||
> >>+ (channel >= DEFAULT_CHANNEL_NUMS &&
> >>+ (priv->core_mask & BIT(channel - DEFAULT_CHANNEL_NUMS))))
> >>+ return 0444;
> >>+
> >>+ return 0;
> >>+}
> >>+
> >>+static const struct hwmon_ops cputemp_ops = {
> >>+ .is_visible = cputemp_is_visible,
> >>+ .read_string = cputemp_read_string,
> >>+ .read = cputemp_read,
> >>+};
> >>+
> >>+static int check_resolved_cores(struct peci_cputemp *priv)
> >>+{
> >>+ struct peci_rd_pci_cfg_local_msg msg;
> >>+ int rc;
> >>+
> >>+ /* Get the RESOLVED_CORES register value */
> >>+ msg.addr = priv->addr;
> >>+ msg.bus = REG_RESOLVED_CORES_BUS;
> >>+ msg.device = REG_RESOLVED_CORES_DEVICE;
> >>+ msg.function = REG_RESOLVED_CORES_FUNCTION;
> >>+ msg.reg = REG_RESOLVED_CORES_OFFSET;
> >>+ msg.rx_len = 4;
> >>+
> >>+ rc = peci_command(priv->client->adapter, PECI_CMD_RD_PCI_CFG_LOCAL,
> >>+ &msg);
> >>+ if (rc)
> >>+ return rc;
> >>+
> >>+ priv->core_mask = le32_to_cpup((__le32 *)msg.pci_config);
> >>+ if (!priv->core_mask)
> >>+ return -EAGAIN;
> >>+
> >>+ dev_dbg(priv->dev, "Scanned resolved cores: 0x%x\n", priv->core_mask);
> >>+ return 0;
> >>+}
> >>+
> >>+static int create_core_temp_info(struct peci_cputemp *priv)
> >>+{
> >>+ int rc, i;
> >>+
> >>+ rc = check_resolved_cores(priv);
> >>+ if (rc)
> >>+ return rc;
> >>+
> >>+ for (i = 0; i < priv->gen_info->core_max; i++)
> >>+ if (priv->core_mask & BIT(i))
> >>+ while (i + DEFAULT_CHANNEL_NUMS >= priv->config_idx)
> >>+ priv->temp_config[priv->config_idx++] =
> >>+ config_table[channel_core];
> >>+
> >>+ return 0;
> >>+}
> >>+
> >>+static int peci_cputemp_probe(struct peci_client *client)
> >>+{
> >>+ struct device *dev = &client->dev;
> >>+ struct peci_cputemp *priv;
> >>+ struct device *hwmon_dev;
> >>+ int rc;
> >>+
> >>+ if ((client->adapter->cmd_mask &
> >>+ (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG))) !=
> >>+ (BIT(PECI_CMD_GET_TEMP) | BIT(PECI_CMD_RD_PKG_CFG)))
> >>+ return -ENODEV;
> >>+
> >>+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
> >>+ if (!priv)
> >>+ return -ENOMEM;
> >>+
> >>+ dev_set_drvdata(dev, priv);
> >>+ priv->client = client;
> >>+ priv->dev = dev;
> >>+ priv->addr = client->addr;
> >>+ priv->cpu_no = priv->addr - PECI_BASE_ADDR;
> >>+
> >>+ snprintf(priv->name, PECI_NAME_SIZE, "peci_cputemp.cpu%d",
> >>+ priv->cpu_no);
> >>+
> >>+ rc = peci_hwmon_get_cpu_gen_info(client->adapter, priv->addr,
> >>+ &priv->gen_info);
> >>+ if (rc)
> >>+ return rc;
> >>+
> >>+ priv->temp_config[priv->config_idx++] = config_table[channel_die];
> >>+ priv->temp_config[priv->config_idx++] = config_table[channel_tcontrol];
> >>+ priv->temp_config[priv->config_idx++] = config_table[channel_tthrottle];
> >>+ priv->temp_config[priv->config_idx++] = config_table[channel_tjmax];
> >>+
> >>+ rc = create_core_temp_info(priv);
> >>+ if (rc)
> >>+ dev_dbg(dev, "Skipped creating core temp info\n");
> >>+
> >>+ priv->chip.ops = &cputemp_ops;
> >>+ priv->chip.info = priv->info;
> >>+
> >>+ priv->info[0] = &priv->temp_info;
> >>+
> >>+ priv->temp_info.type = hwmon_temp;
> >>+ priv->temp_info.config = priv->temp_config;
> >>+
> >>+ hwmon_dev = devm_hwmon_device_register_with_info(priv->dev,
> >>+ priv->name,
> >>+ priv,
> >>+ &priv->chip,
> >>+ NULL);
> >>+
> >>+ if (IS_ERR(hwmon_dev))
> >>+ return PTR_ERR(hwmon_dev);
> >>+
> >>+ dev_dbg(dev, "%s: sensor '%s'\n", dev_name(hwmon_dev), priv->name);
> >>+
> >>+ return 0;
> >>+}
> >>+
> >>+static const struct of_device_id peci_cputemp_of_table[] = {
> >>+ { .compatible = "intel,peci-cputemp" },
> >>+ { }
> >>+};
> >>+MODULE_DEVICE_TABLE(of, peci_cputemp_of_table);
> >>+
> >>+static const struct peci_device_id peci_cputemp_ids[] = {
> >>+ { "peci-cputemp", 0, },
> >>+ { }
> >>+};
> >>+MODULE_DEVICE_TABLE(peci, peci_cputemp_ids);
> >>+
> >>+static struct peci_driver peci_cputemp_driver = {
> >>+ .probe = peci_cputemp_probe,
> >>+ .id_table = peci_cputemp_ids,
> >>+ .driver = {
> >>+ .name = "peci-cputemp",
> >>+ .of_match_table = of_match_ptr(peci_cputemp_of_table),
> >>+ },
> >>+};
> >>+module_peci_driver(peci_cputemp_driver);
> >>+
> >>+MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>");
> >>+MODULE_DESCRIPTION("PECI cputemp driver");
> >>+MODULE_LICENSE("GPL v2");
> >>diff --git a/drivers/hwmon/peci-hwmon.c b/drivers/hwmon/peci-hwmon.c
> >>new file mode 100644
> >>index 000000000000..e137e301eb97
> >>--- /dev/null
> >>+++ b/drivers/hwmon/peci-hwmon.c
> >>@@ -0,0 +1,124 @@
> >>+// SPDX-License-Identifier: GPL-2.0
> >>+// Copyright (c) 2018 Intel Corporation
> >>+
> >>+#include <linux/bitfield.h>
> >>+#include <linux/module.h>
> >>+#include <linux/peci.h>
> >>+
> >>+#include "peci-hwmon.h"
> >>+
> >>+#if IS_ENABLED(CONFIG_X86)
> >>+#include <asm/intel-family.h>
> >>+#else
> >>+#define INTEL_FAM6_HASWELL_X 0x3F
> >>+#define INTEL_FAM6_BROADWELL_X 0x4F
> >>+#define INTEL_FAM6_SKYLAKE_X 0x55
> >>+#endif
> >
> >The entire code is very Intel specific. Why this #if instead of
> >making the driver dependent on X86 ?
> >
>
> This code will be running on ARM kernel at this moment with a purpose
> of monitoring remote x86 CPUs through PECI connection, so it's limited
> on x86 build environment.
>
Then add that comment into the code to explain why you can not include
asm/intel-family.h, and declare the defines unconditionally here.
The distinction is that the driver only _supports_ Intel CPUs but
can _run_ in the kernel of other architectures. This should be explained.
Thanks,
Guenter
> >>+
> >>+#define LOWER_NIBBLE_MASK GENMASK(3, 0)
> >>+#define UPPER_NIBBLE_MASK GENMASK(7, 4)
> >>+
> >>+#define CPU_ID_MODEL_MASK GENMASK(7, 4)
> >>+#define CPU_ID_FAMILY_MASK GENMASK(11, 8)
> >>+#define CPU_ID_EXT_MODEL_MASK GENMASK(19, 16)
> >>+#define CPU_ID_EXT_FAMILY_MASK GENMASK(27, 20)
> >>+
> >>+enum cpu_gens {
> >>+ CPU_GEN_HSX = 0, /* Haswell Xeon */
> >>+ CPU_GEN_BRX, /* Broadwell Xeon */
> >>+ CPU_GEN_SKX, /* Skylake Xeon */
> >>+};
> >>+
> >>+static const struct cpu_gen_info cpu_gen_info_table[] = {
> >>+ [CPU_GEN_HSX] = {
> >>+ .family = 6, /* Family code */
> >>+ .model = INTEL_FAM6_HASWELL_X,
> >>+ .core_max = CORE_MAX_ON_HSX,
> >>+ .chan_rank_max = CHAN_RANK_MAX_ON_HSX,
> >>+ .dimm_idx_max = DIMM_IDX_MAX_ON_HSX },
> >>+ [CPU_GEN_BRX] = {
> >>+ .family = 6, /* Family code */
> >>+ .model = INTEL_FAM6_BROADWELL_X,
> >>+ .core_max = CORE_MAX_ON_BDX,
> >>+ .chan_rank_max = CHAN_RANK_MAX_ON_BDX,
> >>+ .dimm_idx_max = DIMM_IDX_MAX_ON_BDX },
> >>+ [CPU_GEN_SKX] = {
> >>+ .family = 6, /* Family code */
> >>+ .model = INTEL_FAM6_SKYLAKE_X,
> >>+ .core_max = CORE_MAX_ON_SKX,
> >>+ .chan_rank_max = CHAN_RANK_MAX_ON_SKX,
> >>+ .dimm_idx_max = DIMM_IDX_MAX_ON_SKX },
> >>+};
> >>+
> >>+int peci_hwmon_get_cpu_gen_info(struct peci_adapter *adapter, u8 addr,
> >>+ const struct cpu_gen_info **gen_info)
> >>+{
> >>+ u32 cpu_id;
> >>+ int i, rc;
> >>+
> >>+ rc = peci_get_cpu_id(adapter, addr, &cpu_id);
> >>+ if (rc)
> >>+ return rc;
> >>+
> >>+ for (i = 0; i < ARRAY_SIZE(cpu_gen_info_table); i++) {
> >>+ if (FIELD_GET(CPU_ID_FAMILY_MASK, cpu_id) +
> >>+ FIELD_GET(CPU_ID_EXT_FAMILY_MASK, cpu_id) ==
> >>+ cpu_gen_info_table[i].family &&
> >>+ FIELD_GET(CPU_ID_MODEL_MASK, cpu_id) ==
> >>+ FIELD_GET(LOWER_NIBBLE_MASK,
> >>+ cpu_gen_info_table[i].model) &&
> >>+ FIELD_GET(CPU_ID_EXT_MODEL_MASK, cpu_id) ==
> >>+ FIELD_GET(UPPER_NIBBLE_MASK,
> >>+ cpu_gen_info_table[i].model)) {
> >>+ break;
> >>+ }
> >>+ }
> >>+
> >>+ if (i >= ARRAY_SIZE(cpu_gen_info_table))
> >>+ return -ENODEV;
> >>+
> >>+ *gen_info = &cpu_gen_info_table[i];
> >>+
> >>+ return 0;
> >>+}
> >>+EXPORT_SYMBOL_GPL(peci_hwmon_get_cpu_gen_info);
> >>+
> >>+bool peci_hwmon_need_update(struct temp_data *temp)
> >>+{
> >>+ if (temp->valid &&
> >>+ time_before(jiffies, temp->last_updated + UPDATE_INTERVAL))
> >>+ return false;
> >>+
> >>+ return true;
> >>+}
> >>+EXPORT_SYMBOL_GPL(peci_hwmon_need_update);
> >>+
> >>+void peci_hwmon_mark_updated(struct temp_data *temp)
> >>+{
> >>+ temp->valid = 1;
> >>+ temp->last_updated = jiffies;
> >>+}
> >>+EXPORT_SYMBOL_GPL(peci_hwmon_mark_updated);
> >>+
> >>+int peci_hwmon_rd_pkg_cfg_cmd(struct peci_adapter *adapter, u8 addr,
> >>+ u8 mbx_idx, u16 param, u8 *data)
> >>+{
> >>+ struct peci_rd_pkg_cfg_msg msg;
> >>+ int rc;
> >>+
> >>+ msg.addr = addr;
> >>+ msg.index = mbx_idx;
> >>+ msg.param = param;
> >>+ msg.rx_len = 4;
> >>+
> >>+ rc = peci_command(adapter, PECI_CMD_RD_PKG_CFG, &msg);
> >>+ if (!rc)
> >>+ memcpy(data, msg.pkg_config, 4);
> >>+
> >>+ return rc;
> >>+}
> >>+EXPORT_SYMBOL_GPL(peci_hwmon_rd_pkg_cfg_cmd);
> >>+
> >>+MODULE_AUTHOR("Jae Hyun Yoo <jae.hyun.yoo@xxxxxxxxxxxxxxx>");
> >>+MODULE_DESCRIPTION("PECI hwmon module");
> >>+MODULE_LICENSE("GPL v2");
> >>diff --git a/drivers/hwmon/peci-hwmon.h b/drivers/hwmon/peci-hwmon.h
> >>new file mode 100644
> >>index 000000000000..0896c27f33d8
> >>--- /dev/null
> >>+++ b/drivers/hwmon/peci-hwmon.h
> >>@@ -0,0 +1,51 @@
> >>+/* SPDX-License-Identifier: GPL-2.0 */
> >>+/* Copyright (c) 2018 Intel Corporation */
> >>+
> >>+#ifndef __PECI_HWMON_H
> >>+#define __PECI_HWMON_H
> >>+
> >>+#include <linux/peci.h>
> >>+
> >>+#define TEMP_TYPE_PECI 6 /* Sensor type 6: Intel PECI */
> >>+
> >>+#define UPDATE_INTERVAL HZ
> >>+
> >>+struct temp_data {
> >>+ uint valid;
> >>+ s32 value;
> >>+ ulong last_updated;
> >>+};
> >>+
> >>+struct cpu_gen_info {
> >>+ u16 family;
> >>+ u8 model;
> >>+ uint core_max;
> >>+ uint chan_rank_max;
> >>+ uint dimm_idx_max;
> >>+};
> >>+
> >>+#define CORE_MAX_ON_HSX 18 /* Max number of cores on Haswell */
> >>+#define CHAN_RANK_MAX_ON_HSX 8 /* Max number of channel ranks on Haswell */
> >>+#define DIMM_IDX_MAX_ON_HSX 3 /* Max DIMM index per channel on Haswell */
> >>+
> >>+#define CORE_MAX_ON_BDX 24 /* Max number of cores on Broadwell */
> >>+#define CHAN_RANK_MAX_ON_BDX 4 /* Max number of channel ranks on Broadwell */
> >>+#define DIMM_IDX_MAX_ON_BDX 3 /* Max DIMM index per channel on Broadwell */
> >>+
> >>+#define CORE_MAX_ON_SKX 28 /* Max number of cores on Skylake */
> >>+#define CHAN_RANK_MAX_ON_SKX 6 /* Max number of channel ranks on Skylake */
> >>+#define DIMM_IDX_MAX_ON_SKX 2 /* Max DIMM index per channel on Skylake */
> >>+
> >>+#define CORE_NUMS_MAX CORE_MAX_ON_SKX
> >>+#define CHAN_RANK_MAX CHAN_RANK_MAX_ON_HSX
> >>+#define DIMM_IDX_MAX DIMM_IDX_MAX_ON_HSX
> >>+#define DIMM_NUMS_MAX (CHAN_RANK_MAX * DIMM_IDX_MAX)
> >>+
> >>+int peci_hwmon_get_cpu_gen_info(struct peci_adapter *adapter, u8 addr,
> >>+ const struct cpu_gen_info **gen_info);
> >>+bool peci_hwmon_need_update(struct temp_data *temp);
> >>+void peci_hwmon_mark_updated(struct temp_data *temp);
> >>+int peci_hwmon_rd_pkg_cfg_cmd(struct peci_adapter *adapter, u8 addr,
> >>+ u8 mbx_idx, u16 param, u8 *data);
> >>+
> >>+#endif /* __PECI_HWMON_H */
> >>--
> >>2.17.0
> >>
--
To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
