On Tue, Sep 27, 2016 at 02:07:26PM +0200, Andrea Merello wrote: > Signed-off-by: Andrea Merello <andrea.merello@xxxxxxxxx> > Cc: Rob Herring <robh+dt@xxxxxxxxxx> > Cc: Mark Rutland <mark.rutland@xxxxxxx> > --- > Documentation/devicetree/bindings/hwmon/stts751.txt | 19 +++++++++++++++++++ > 1 file changed, 19 insertions(+) > create mode 100644 Documentation/devicetree/bindings/hwmon/stts751.txt > > diff --git a/Documentation/devicetree/bindings/hwmon/stts751.txt b/Documentation/devicetree/bindings/hwmon/stts751.txt > new file mode 100644 > index 0000000..277ad46 > --- /dev/null > +++ b/Documentation/devicetree/bindings/hwmon/stts751.txt > @@ -0,0 +1,19 @@ > +* STTS751 thermometer. > + > +Required node properties: > +- compatible: "stts751" > +- reg: I2C bus address of the device > + > +Optional properties: > +- has-therm: specifies that the "therm" pin is wired > +- has-event: specifies that the "event" pin is wired As mentioned in the code patch, I don't think those properties are actually needed. Guenter > +- smbus-timeout-disable: when set, the smbus timeout function will be disabled > + > +Example stts751 node: > + > +temp-sensor { > + compatible = "stts751"; > + reg = <0x48>; > + has-therm; > + has-event; > +} > -- > 2.7.4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-hwmon" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html