Re: [PATCH v7 2/3] dt-bindings: pinctrl: Document nuvoton ma35d1 pin control

[Rob Herring <robh@xxxxxxxxxx>]

On Tue, Apr 09, 2024 at 09:56:36AM +0000, Jacky Huang wrote:
> From: Jacky Huang <ychuang3@xxxxxxxxxxx>
> 
> Add documentation to describe nuvoton ma35d1 pin control and GPIO.
> 
> Signed-off-by: Jacky Huang <ychuang3@xxxxxxxxxxx>
> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> ---
>  .../pinctrl/nuvoton,ma35d1-pinctrl.yaml       | 163 ++++++++++++++++++
>  1 file changed, 163 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/nuvoton,ma35d1-pinctrl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,ma35d1-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nuvoton,ma35d1-pinctrl.yaml
> new file mode 100644
> index 000000000000..8b9ec263213f
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,ma35d1-pinctrl.yaml
> @@ -0,0 +1,163 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/nuvoton,ma35d1-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Nuvoton MA35D1 pin control and GPIO
> +
> +maintainers:
> +  - Shan-Chun Hung <schung@xxxxxxxxxxx>
> +  - Jacky Huang <ychuang3@xxxxxxxxxxx>
> +
> +allOf:
> +  - $ref: pinctrl.yaml#
> +
> +properties:
> +  compatible:
> +    enum:
> +      - nuvoton,ma35d1-pinctrl
> +
> +  '#address-cells':
> +    const: 1
> +
> +  '#size-cells':
> +    const: 1
> +
> +  nuvoton,sys:
> +    $ref: /schemas/types.yaml#/definitions/phandle
> +    description:
> +      phandle of the system-management node.

If these are the *only* registers to access the pinctrl functions, then 
this binding should be a child node of the system-management node and 
then you don't need this property.

And if the registers for pinctrl are a defined range, you should add a 
'reg' property (even though Linux and regmap don't use it).

> +
> +  ranges: true

This property makes no sense with the binding as-is. You don't have 
any address to translate. Maybe with the above changes it will.

> +
> +patternProperties:
> +  "^gpio@[0-9a-f]+$":
> +    type: object
> +    additionalProperties: false
> +    properties:
> +      gpio-controller: true
> +
> +      '#gpio-cells':
> +        const: 2
> +
> +      reg:
> +        maxItems: 1
> +
> +      clocks:
> +        maxItems: 1
> +
> +      interrupt-controller: true
> +
> +      '#interrupt-cells':
> +        const: 2
> +
> +      interrupts:
> +        description:
> +          The interrupt outputs to sysirq.
> +        maxItems: 1
> +
> +    required:
> +      - gpio-controller
> +      - '#gpio-cells'
> +      - reg
> +      - clocks
> +      - interrupt-controller
> +      - '#interrupt-cells'
> +      - interrupts
> +
> +  "^pin-[a-z0-9]+$":
> +    type: object
> +    description:
> +      A pinctrl node should contain at least one subnodes representing the
> +      pinctrl groups available on the machine. Each subnode will list the
> +      pins it needs, and how they should be configured, with regard to muxer
> +      configuration, pullups, drive strength, input enable/disable and input
> +      schmitt.
> +
> +    $ref: pincfg-node.yaml#
> +
> +    properties:
> +      power-source:
> +        description: |
> +          Valid arguments are described as below:
> +          0: power supply of 1.8V
> +          1: power supply of 3.3V
> +        enum: [0, 1]
> +
> +      drive-strength-microamp:
> +        oneOf:
> +          - enum: [ 2900, 4400, 5800, 7300, 8600, 10100, 11500, 13000 ]
> +            description: 1.8V I/O driving strength
> +          - enum: [ 17100, 25600, 34100, 42800, 48000, 56000, 77000, 82000 ]
> +            description: 3.3V I/O driving strength
> +
> +    unevaluatedProperties: false

In the indented cases, it's preferred to put this before 'properties'.


> +
> +  "-grp$":
> +    type: object
> +    description:
> +      Pinctrl node's client devices use subnodes for desired pin configuration.
> +      Client device subnodes use below standard properties.

Missing $ref to common properties and 'unevaluatedProperties'.

> +    properties:
> +      nuvoton,pins:
> +        description:
> +          Each entry consists of 4 parameters and represents the mux and config
> +          setting for one pin.
> +        $ref: /schemas/types.yaml#/definitions/uint32-matrix
> +        minItems: 1
> +        items:
> +          items:
> +            - minimum: 0
> +              maximum: 13
> +              description:
> +                Pin bank.
> +            - minimum: 0
> +              maximum: 15
> +              description:
> +                Pin bank index.
> +            - minimum: 0
> +              maximum: 15
> +              description:
> +                Mux 0 means GPIO and mux 1 to 15 means the specific device function.
> +
> +required:
> +  - compatible
> +  - nuvoton,sys
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/gpio/gpio.h>
> +    #include <dt-bindings/clock/nuvoton,ma35d1-clk.h>
> +
> +    pinctrl@40040000 {
> +        compatible = "nuvoton,ma35d1-pinctrl";
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +        nuvoton,sys = <&sys>;
> +        ranges = <0 0x40040000 0xc00>;
> +
> +        gpio@0 {
> +            reg = <0x0 0x40>;
> +            interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
> +            clocks = <&clk GPA_GATE>;
> +            gpio-controller;
> +            #gpio-cells = <2>;
> +            interrupt-controller;
> +            #interrupt-cells = <2>;
> +        };
> +
> +        uart-grp {
> +            uart11-pins {

This is not what the schema says.

> +                nuvoton,pins = <11 0 2>,
> +                               <11 1 2>,
> +                               <11 2 2>,
> +                               <11 3 2>;
> +                bias-disable;
> +                power-source = <1>;
> +            };
> +        };

Include a pin-* node in the example.

> +    };
> -- 
> 2.34.1
>