Re: [PATCH 00/25] Introduce support of audio for Amlogic A1 SoC family

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jan!

On 15/03/2024 00:21, Jan Dakinevich wrote:
This series includes the following:

  - new audio clock and reset controller data and adaptation for it of existing
    code (patches 0001..0004);

  - adaptation of existing audio components for A1 Soc (patches 0005..0021);

  - handy cosmetics for dai-link naming (patches 0022..0023);

  - integration of audio devices into common trees (patch 0024);

  - audio support bring up on Amlogic ad402 reference board (patch 0025). This
    patch is not actually checked on real hardware (because all ad402 that we had
    were burned out). This patch is based on ad402's schematics and on experience
    with our own hardware (which is very close to reference board);

Thanks for your serie, it's nice you're working on upstreaming this feature.

In my opinion it's fine to have a "big" initial serie if you're not sure
if your changes are ok, but next time add the RFC tag so we know it's not
a final changeset and you seek advices.

Overall the code is clean and your patch order makes sense if they were meant
to be applied by a single maintainer, but in this case it will be split
into multiple subsystems so it's better to split them as Jerome explained
to ease review and the maintainers process.

Don't hesitate discussing with us in the #linux-amlogic IRC channel
on Libera.Chat, the goal is to reduce the number of patch version and
ease the review and maintainance process.

Concerning the link-name property, I think it should be done afterwards
since it's not necessary to support audio on A1, and I think it could
be extended to other SoC boards (which would be a great feature).

Neil


Dmitry Rokosov (2):
   ASoC: dt-bindings: meson: introduce link-name optional property
   ASoC: meson: implement link-name optional property in meson card utils

Jan Dakinevich (23):
   clk: meson: a1: restrict an amount of 'hifi_pll' params
   clk: meson: axg: move reset controller's code to separate module
   dt-bindings: clock: meson: add A1 audio clock and reset controller
     bindings
   clk: meson: a1: add the audio clock controller driver
   ASoC: meson: codec-glue: add support for capture stream
   ASoC: meson: g12a-toacodec: fix "Lane Select" width
   ASoC: meson: g12a-toacodec: rework the definition of bits
   ASoC: dt-bindings: meson: g12a-toacodec: add support for A1 SoC family
   ASoC: meson: g12a-toacodec: add support for A1 SoC family
   ASoC: meson: t9015: prepare to adding new platforms
   ASoC: dt-bindings: meson: t9015: add support for A1 SoC family
   ASoC: meson: t9015: add support for A1 SoC family
   ASoC: dt-bindings: meson: axg-pdm: document 'sysrate' property
   ASoC: meson: axg-pdm: introduce 'sysrate' property
   pinctrl/meson: fix typo in PDM's pin name
   ASoC: dt-bindings: meson: meson-axg-audio-arb: claim support of A1 SoC
     family
   ASoC: dt-bindings: meson: axg-fifo: claim support of A1 SoC family
   ASoC: dt-bindings: meson: axg-pdm: claim support of A1 SoC family
   ASoC: dt-bindings: meson: axg-sound-card: claim support of A1 SoC
     family
   ASoC: dt-bindings: meson: axg-tdm-formatters: claim support of A1 SoC
     family
   ASoC: dt-bindings: meson: axg-tdm-iface: claim support of A1 SoC
     family
   arm64: dts: meson: a1: add audio devices
   arm64: dts: ad402: enable audio

  .../bindings/clock/amlogic,a1-audio-clkc.yaml |  83 +++
  .../reset/amlogic,meson-axg-audio-arb.yaml    |  10 +-
  .../bindings/sound/amlogic,axg-fifo.yaml      |   8 +
  .../bindings/sound/amlogic,axg-pdm.yaml       |   5 +
  .../sound/amlogic,axg-sound-card.yaml         |  12 +-
  .../sound/amlogic,axg-tdm-formatters.yaml     |  22 +-
  .../bindings/sound/amlogic,axg-tdm-iface.yaml |   6 +-
  .../bindings/sound/amlogic,g12a-toacodec.yaml |   1 +
  .../bindings/sound/amlogic,gx-sound-card.yaml |   6 +
  .../bindings/sound/amlogic,t9015.yaml         |   4 +-
  .../arm64/boot/dts/amlogic/meson-a1-ad402.dts | 126 ++++
  arch/arm64/boot/dts/amlogic/meson-a1.dtsi     | 471 +++++++++++++++
  drivers/clk/meson/Kconfig                     |  18 +
  drivers/clk/meson/Makefile                    |   2 +
  drivers/clk/meson/a1-audio.c                  | 556 ++++++++++++++++++
  drivers/clk/meson/a1-audio.h                  |  58 ++
  drivers/clk/meson/a1-pll.c                    |   8 +-
  drivers/clk/meson/axg-audio.c                 |  95 +--
  drivers/clk/meson/meson-audio-rstc.c          | 109 ++++
  drivers/clk/meson/meson-audio-rstc.h          |  12 +
  drivers/pinctrl/meson/pinctrl-meson-a1.c      |   6 +-
  .../dt-bindings/clock/amlogic,a1-audio-clkc.h | 122 ++++
  .../reset/amlogic,meson-a1-audio-reset.h      |  29 +
  .../dt-bindings/sound/meson-g12a-toacodec.h   |   5 +
  sound/soc/meson/axg-pdm.c                     |  10 +-
  sound/soc/meson/g12a-toacodec.c               | 298 ++++++++--
  sound/soc/meson/meson-card-utils.c            |  12 +-
  sound/soc/meson/meson-codec-glue.c            | 174 ++++--
  sound/soc/meson/meson-codec-glue.h            |  23 +
  sound/soc/meson/t9015.c                       | 326 +++++++++-
  30 files changed, 2394 insertions(+), 223 deletions(-)
  create mode 100644 Documentation/devicetree/bindings/clock/amlogic,a1-audio-clkc.yaml
  create mode 100644 drivers/clk/meson/a1-audio.c
  create mode 100644 drivers/clk/meson/a1-audio.h
  create mode 100644 drivers/clk/meson/meson-audio-rstc.c
  create mode 100644 drivers/clk/meson/meson-audio-rstc.h
  create mode 100644 include/dt-bindings/clock/amlogic,a1-audio-clkc.h
  create mode 100644 include/dt-bindings/reset/amlogic,meson-a1-audio-reset.h






[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux