On Mon, Feb 26, 2024 at 03:46:56PM +0200, Arturas Moskvinas wrote: > Move output enabling after chip registers are cleared. Does this fix anything? If so, maybe elaborate a bit the potential behavioural changes on the real lines. -- With Best Regards, Andy Shevchenko
Re: [PATCH] gpio: 74x164: Enable output pins after registers are reset
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: Re: [PATCH] gpio: 74x164: Enable output pins after registers are reset
- From: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
- Date: Mon, 26 Feb 2024 16:01:02 +0200
- In-reply-to: <20240226134656.608559-1-arturas.moskvinas@gmail.com>
- Organization: Intel Finland Oy - BIC 0357606-4 - Westendinkatu 7, 02160 Espoo
- References: <20240226134656.608559-1-arturas.moskvinas@gmail.com>
- Follow-Ups:
- Re: [PATCH] gpio: 74x164: Enable output pins after registers are reset
- From: Arturas Moskvinas
- Re: [PATCH] gpio: 74x164: Enable output pins after registers are reset
- References:
- [PATCH] gpio: 74x164: Enable output pins after registers are reset
- From: Arturas Moskvinas
- [PATCH] gpio: 74x164: Enable output pins after registers are reset
- Prev by Date: Re: [brgl:gpio/for-next 42/47] gpio-mmio.c:undefined reference to `iowrite64'
- Next by Date: Re: [PATCH v2 2/4] gpio: cdev: use correct pointer accessors with SRCU
- Previous by thread: [PATCH] gpio: 74x164: Enable output pins after registers are reset
- Next by thread: Re: [PATCH] gpio: 74x164: Enable output pins after registers are reset
- Index(es):
 |