[PATCH] gpio: 74x164: Enable output pins after registers are reset

[Arturas Moskvinas <arturas.moskvinas@xxxxxxxxx>]

Move output enabling after chip registers are cleared.

Signed-off-by: Arturas Moskvinas <arturas.moskvinas@xxxxxxxxx>
---
 drivers/gpio/gpio-74x164.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpio-74x164.c b/drivers/gpio/gpio-74x164.c
index e00c33310517..753e7be039e4 100644
--- a/drivers/gpio/gpio-74x164.c
+++ b/drivers/gpio/gpio-74x164.c
@@ -127,8 +127,6 @@ static int gen_74x164_probe(struct spi_device *spi)
 	if (IS_ERR(chip->gpiod_oe))
 		return PTR_ERR(chip->gpiod_oe);
 
-	gpiod_set_value_cansleep(chip->gpiod_oe, 1);
-
 	spi_set_drvdata(spi, chip);
 
 	chip->gpio_chip.label = spi->modalias;
@@ -153,6 +151,8 @@ static int gen_74x164_probe(struct spi_device *spi)
 		goto exit_destroy;
 	}
 
+	gpiod_set_value_cansleep(chip->gpiod_oe, 1);
+
 	ret = gpiochip_add_data(&chip->gpio_chip, chip);
 	if (!ret)
 		return 0;

base-commit: d206a76d7d2726f3b096037f2079ce0bd3ba329b
-- 
2.43.2