Re: [PATCH V3 1/4] gpio: eic-sprd: Keep the clock rtc_1k on

[wenhua lin <wenhua.lin1994@xxxxxxxxx>]

On Fri, Jan 5, 2024 at 11:26 AM Chunyan Zhang <zhang.lyra@xxxxxxxxx> wrote:
>
> On Thu, 4 Jan 2024 at 10:43, Wenhua Lin <Wenhua.Lin@xxxxxxxxxx> wrote:
> >
> > The eic debounce does not have a clock of rtc_1k in the sleep state,
> > but the eic debounce will be used to wake up the system, therefore the
> > clock of rtc_1k needs to be kept open.
>
> It seems that this issue is not in the latest SoCs. I would suggest
> not changing for the time being.
>

OK, we will delete this modification on pacth v4.

> Thanks,
> Chunyan
>
>
> >
> > Signed-off-by: Wenhua Lin <Wenhua.Lin@xxxxxxxxxx>
> > ---
> >  drivers/gpio/gpio-eic-sprd.c | 2 ++
> >  1 file changed, 2 insertions(+)
> >
> > diff --git a/drivers/gpio/gpio-eic-sprd.c b/drivers/gpio/gpio-eic-sprd.c
> > index be7f2fa5aa7b..bdcb3510a208 100644
> > --- a/drivers/gpio/gpio-eic-sprd.c
> > +++ b/drivers/gpio/gpio-eic-sprd.c
> > @@ -24,6 +24,7 @@
> >  #define SPRD_EIC_DBNC_IC               0x24
> >  #define SPRD_EIC_DBNC_TRIG             0x28
> >  #define SPRD_EIC_DBNC_CTRL0            0x40
> > +#define SPRD_EIC_DBNC_FORCE_CLK                0x8000
> >
> >  #define SPRD_EIC_LATCH_INTEN           0x0
> >  #define SPRD_EIC_LATCH_INTRAW          0x4
> > @@ -223,6 +224,7 @@ static int sprd_eic_set_debounce(struct gpio_chip *chip, unsigned int offset,
> >         u32 value = readl_relaxed(base + reg) & ~SPRD_EIC_DBNC_MASK;
> >
> >         value |= (debounce / 1000) & SPRD_EIC_DBNC_MASK;
> > +       value |= SPRD_EIC_DBNC_FORCE_CLK;
> >         writel_relaxed(value, base + reg);
> >
> >         return 0;
> > --
> > 2.17.1
> >