Re: pinctrl: Questions regarding pinconf_ops and bcm2835

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Am 03.01.24 um 13:12 schrieb Stefan Wahren:
Hi,
i recently noticed that the BCM2711 (used on Raspberry Pi 4) doesn't
implement pin_config_get, but this SOC is able to read back the bias
settings of the pins. After looking deeper into the pinconf_ops i had
some questions:

1. Are there any other benefits from implementing pin_config_get
except of a proper debugfs output?

2. Since the pin direction of BCM2835/2711 (input/output) is already
handled by pinmux_ops via gpio_set_direction, how should
pin_config_set handle PIN_CONFIG_OUTPUT_ENABLE?

3. In case pin_config_get is implemented should the parameter
PIN_CONFIG_OUTPUT_ENABLE and PIN_CONFIG_OUTPUT be handled?

Best regards


gentle ping





[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux