On Wed, Sep 27, 2023 at 5:28 PM Baolin Wang <baolin.wang@xxxxxxxxxxxxxxxxx> wrote: > > > > On 9/21/2023 5:00 PM, Wenhua Lin wrote: > > In order to solve the problem of insufficient eic, > > it supports 8 banks of eic controller, each bank contains 8 eic. > > > > Signed-off-by: Wenhua Lin <Wenhua.Lin@xxxxxxxxxx> > > --- > > drivers/gpio/gpio-eic-sprd.c | 8 ++++---- > > 1 file changed, 4 insertions(+), 4 deletions(-) > > > > diff --git a/drivers/gpio/gpio-eic-sprd.c b/drivers/gpio/gpio-eic-sprd.c > > index e85addbdf8aa..6bb002060c3e 100644 > > --- a/drivers/gpio/gpio-eic-sprd.c > > +++ b/drivers/gpio/gpio-eic-sprd.c > > @@ -51,10 +51,10 @@ > > #define SPRD_EIC_SYNC_DATA 0x1c > > > > /* > > - * The digital-chip EIC controller can support maximum 3 banks, and each bank > > + * The digital-chip EIC controller can support maximum 8 banks, and each bank > > * contains 8 EICs. > > */ > > -#define SPRD_EIC_MAX_BANK 3 > > +#define SPRD_EIC_MAX_BANK 8 > > #define SPRD_EIC_PER_BANK_NR 8 > > #define SPRD_EIC_DATA_MASK GENMASK(7, 0) > > #define SPRD_EIC_BIT(x) ((x) & (SPRD_EIC_PER_BANK_NR - 1)) > > @@ -615,9 +615,9 @@ static int sprd_eic_probe(struct platform_device *pdev) > > > > for (i = 0; i < SPRD_EIC_MAX_BANK; i++) { > > /* > > - * We can have maximum 3 banks EICs, and each EIC has > > + * We can have maximum 8 banks EICs, and each EIC has > > * its own base address. But some platform maybe only > > - * have one bank EIC, thus base[1] and base[2] can be > > + * have one bank EIC, thus base[1] and base[7] can be > > Should be "base[1] to base[7]" Thank you very much for your review. I will fix this issue in patch v3. > > > * optional. > > */ > > res = platform_get_resource(pdev, IORESOURCE_MEM, i);