[PATCH 2/2] gpio: vf610: config the data value before the direction setting to avoid glitch

[haibo.chen@xxxxxxx]

From: Haibo Chen <haibo.chen@xxxxxxx>

We find a glitch when config the pad as output high. To avoid this
glitch, move the data value setting before direction config in the
function vf610_gpio_direction_output().

Signed-off-by: Haibo Chen <haibo.chen@xxxxxxx>
---
 drivers/gpio/gpio-vf610.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/gpio/gpio-vf610.c b/drivers/gpio/gpio-vf610.c
index 77d5b8dd2bd5..444501c56a3b 100644
--- a/drivers/gpio/gpio-vf610.c
+++ b/drivers/gpio/gpio-vf610.c
@@ -140,14 +140,14 @@ static int vf610_gpio_direction_output(struct gpio_chip *chip, unsigned gpio,
 	unsigned long mask = BIT(gpio);
 	u32 val;
 
+	vf610_gpio_set(chip, gpio, value);
+
 	if (port->sdata->have_paddr) {
 		val = vf610_gpio_readl(port->gpio_base + GPIO_PDDR);
 		val |= mask;
 		vf610_gpio_writel(val, port->gpio_base + GPIO_PDDR);
 	}
 
-	vf610_gpio_set(chip, gpio, value);
-
 	return pinctrl_gpio_direction_output(chip->base + gpio);
 }
 
-- 
2.34.1