Re: [PATCH 2/2] pinctrl: renesas: rzg2l: Enable noise filter for GPIO interrupt input

[Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>]

Hi Biju,

On Mon, Sep 18, 2023 at 2:34 PM Biju Das <biju.das.jz@xxxxxxxxxxxxxx> wrote:
> As per RZ/G2L hardware manual Rev.1.30 section 8.7.3 GPIO Interrupt (TINT)
> and 41.4.1 Operation for GPIO function, we need to set digital noise
> filter for GPIO interrupt.
>
> This patch enables noise filter for GPIO interrupt in
> rzg2l_gpio_irq_enable() and disable it in rzg2l_gpio_irq_disable().
>
> Fixes: db2e5f21a48e ("pinctrl: renesas: pinctrl-rzg2l: Add IRQ domain to handle GPIO interrupt")
> Signed-off-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>
> Tested-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>

Thanks for your patch!

> --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> @@ -96,6 +96,7 @@
>  #define PIN(n)                 (0x0800 + 0x10 + (n))
>  #define IOLH(n)                        (0x1000 + (n) * 8)
>  #define IEN(n)                 (0x1800 + (n) * 8)
> +#define FILONOFF(n)            (0x2080 + (n) * 8)
>  #define ISEL(n)                        (0x2c80 + (n) * 8)
>  #define PWPR                   (0x3014)
>  #define SD_CH(n)               (0x3000 + (n) * 4)

LGTM, but shouldn't you configure the Digital Noise Filter Number
(FILNUM) and Clock Selection (FILCLKSEL) registers, too?

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds