[PATCH 0/2] Fix for GPIO interrupts

[Biju Das <biju.das.jz@xxxxxxxxxxxxxx>]

The following issues observed while adding IRQ support for RTC.
 * The driver is not following reverse order of enable() for disable().
 * The driver is not following as per hardware manual for setting
   GPIO interrupts. As per HW manual we need to set noise filter
   for GPIO interrupts.

This patch series fixes those issues.

Biju Das (2):
  pinctrl: renesas: rzg2l: Make reverse order of enable() for disable()
  pinctrl: renesas: rzg2l: Enable noise filter for GPIO interrupt input

 drivers/pinctrl/renesas/pinctrl-rzg2l.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)

-- 
2.25.1