Re: [PATCH] pinctrl: renesas: pinctrl-rzg2l: Add validation of GPIO pin in rzg2l_gpio_request()

[claudiu beznea <claudiu.beznea@xxxxxxxxx>]

Hi, Prabhakar,

On 9/5/23 15:56, Prabhakar wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> 
> Validate the GPIO pin request in rzg2l_gpio_request() callback using
> rzg2l_validate_gpio_pin() function. This stops any accidental usage
> of GPIO pins which are not supported by the SoCs.
> 
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> ---
>  drivers/pinctrl/renesas/pinctrl-rzg2l.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/drivers/pinctrl/renesas/pinctrl-rzg2l.c b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> index 37cdfe4b04f9..4ad08a4b786a 100644
> --- a/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c
> @@ -795,12 +795,18 @@ static const struct pinconf_ops rzg2l_pinctrl_confops = {
>  static int rzg2l_gpio_request(struct gpio_chip *chip, unsigned int offset)
>  {
>  	struct rzg2l_pinctrl *pctrl = gpiochip_get_data(chip);
> +	const struct pinctrl_pin_desc *pin = &pctrl->desc.pins[offset];
> +	u64 *pin_data = pin->drv_data;

Maybe move this down a bit to keep the reverse christmas tree order that
the driver is using as pattern.

Other than this:
Reviewed-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>
Tested-by: Claudiu Beznea <claudiu.beznea.uj@xxxxxxxxxxxxxx>

>  	u32 port = RZG2L_PIN_ID_TO_PORT(offset);
>  	u8 bit = RZG2L_PIN_ID_TO_PIN(offset);
>  	unsigned long flags;
>  	u8 reg8;
>  	int ret;
>  
> +	ret = rzg2l_validate_gpio_pin(pctrl, *pin_data, port, bit);
> +	if (ret)
> +		return ret;
> +
>  	ret = pinctrl_gpio_request(chip->base + offset);
>  	if (ret)
>  		return ret;