Support add_pin_ranges() so that pinctrl_gpio_request() can be called. The GPIO value is not modified when the user runs the "gpioset" tool. This is because when gpiochip_generic_request is invoked by the gpio-mlxbf3 driver, "pin_ranges" is empty so it skips "pinctrl_gpio_request()". pinctrl_gpio_request() is essential in the code flow because it changes the mux value so that software has control over modifying the GPIO value. Adding add_pin_ranges() creates a dependency on the pinctrl-mlxbf3.c driver. Fixes: cd33f216d24 ("gpio: mlxbf3: Add gpio driver support") Signed-off-by: Asmaa Mnebhi <asmaa@xxxxxxxxxx> --- v1->v2: - No changes. drivers/gpio/gpio-mlxbf3.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/gpio/gpio-mlxbf3.c b/drivers/gpio/gpio-mlxbf3.c index e30cee108986..d00cc61ea7b8 100644 --- a/drivers/gpio/gpio-mlxbf3.c +++ b/drivers/gpio/gpio-mlxbf3.c @@ -158,6 +158,19 @@ static const struct irq_chip gpio_mlxbf3_irqchip = { GPIOCHIP_IRQ_RESOURCE_HELPERS, }; +static int mlxbf3_gpio_add_pin_ranges(struct gpio_chip *chip) +{ + unsigned int id = 0; + int ret; + + if (chip->ngpio % MLXBF3_GPIO_MAX_PINS_PER_BLOCK) + id = 1; + + return gpiochip_add_pin_range(chip, "MLNXBF34:00", + chip->base, id * MLXBF3_GPIO_MAX_PINS_PER_BLOCK, + chip->ngpio); +} + static int mlxbf3_gpio_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -197,6 +210,7 @@ static int mlxbf3_gpio_probe(struct platform_device *pdev) gc->request = gpiochip_generic_request; gc->free = gpiochip_generic_free; gc->owner = THIS_MODULE; + gc->add_pin_ranges = mlxbf3_gpio_add_pin_ranges; irq = platform_get_irq(pdev, 0); if (irq >= 0) { @@ -243,6 +257,7 @@ static struct platform_driver mlxbf3_gpio_driver = { }; module_platform_driver(mlxbf3_gpio_driver); +MODULE_SOFTDEP("pre: pinctrl-mlxbf3"); MODULE_DESCRIPTION("NVIDIA BlueField-3 GPIO Driver"); MODULE_AUTHOR("Asmaa Mnebhi <asmaa@xxxxxxxxxx>"); MODULE_LICENSE("Dual BSD/GPL"); -- 2.30.1