[RESEND PATCH v8 08/10] serial: sc16is7xx: add call to get rs485 DT flags and properties

[Hugo Villeneuve <hugo@xxxxxxxxxxx>]

From: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>

Add call to uart_get_rs485_mode() to probe for RS485 flags and
properties from device tree.

Signed-off-by: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@xxxxxxxxxxxxxxx>
Reviewed-by: Lech Perczak <lech.perczak@xxxxxxxxxxxxxxx>
Tested-by: Lech Perczak <lech.perczak@xxxxxxxxxxxxxxx>
---
 drivers/tty/serial/sc16is7xx.c | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index 07ae889db296..49213be60baf 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1549,6 +1549,10 @@ static int sc16is7xx_probe(struct device *dev,
 			goto out_ports;
 		}
 
+		ret = uart_get_rs485_mode(&s->p[i].port);
+		if (ret)
+			goto out_ports;
+
 		/* Disable all interrupts */
 		sc16is7xx_port_write(&s->p[i].port, SC16IS7XX_IER_REG, 0);
 		/* Disable TX/RX */
-- 
2.30.2