[PATCH v3 05/11] serial: sc16is7xx: fix broken port 0 uart init

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>

While experimenting with rs485 configuration on a SC16IS752 dual UART,
I found that the sc16is7xx_config_rs485() function was called only for
the second port (index 1, channel B), causing initialization problems
for the first port.

For the sc16is7xx driver, port->membase and port->mapbase are not set,
and their default values are 0. And we set port->iobase to the device
index. This means that when the first device is registered using the
uart_add_one_port() function, the following values will be in the port
structure:
    port->membase = 0
    port->mapbase = 0
    port->iobase  = 0

Therefore, the function uart_configure_port() in serial_core.c will
exit early because of the following check:
	/*
	 * If there isn't a port here, don't do anything further.
	 */
	if (!port->iobase && !port->mapbase && !port->membase)
		return;

Typically, I2C and SPI drivers do not set port->membase and
port->mapbase. But I found that the max310x driver sets
port->membase to ~0 (all ones). By implementing the same change in our
driver, uart_configure_port() is now correctly executed.

Fixes: dfeae619d781 ("serial: sc16is7xx")
Signed-off-by: Hugo Villeneuve <hvilleneuve@xxxxxxxxxxxx>
---
I am not sure if this change is the best long-term solution to this
problem, and maybe uart_configure_port() itself could be modified to
take into account the fact that some devices have all three *base
values set to zero?

Also, many drivers use port->iobase as an index, is it the correct way
to use it?

For example, for our driver, there was
commit 5da6b1c079e6 ("sc16is7xx: Set iobase to device index") with the
following explanation:
    "Set the .iobase value to the relative index within the device to allow
    infering the order through sysfs."

 drivers/tty/serial/sc16is7xx.c | 1 +
 1 file changed, 1 insertion(+)

diff --git a/drivers/tty/serial/sc16is7xx.c b/drivers/tty/serial/sc16is7xx.c
index af7e66db54b4..8a2fc6f89d36 100644
--- a/drivers/tty/serial/sc16is7xx.c
+++ b/drivers/tty/serial/sc16is7xx.c
@@ -1443,6 +1443,7 @@ static int sc16is7xx_probe(struct device *dev,
 		s->p[i].port.fifosize	= SC16IS7XX_FIFO_SIZE;
 		s->p[i].port.flags	= UPF_FIXED_TYPE | UPF_LOW_LATENCY;
 		s->p[i].port.iobase	= i;
+		s->p[i].port.membase	= (void __iomem *)~0;
 		s->p[i].port.iotype	= UPIO_PORT;
 		s->p[i].port.uartclk	= freq;
 		s->p[i].port.rs485_config = sc16is7xx_config_rs485;
-- 
2.30.2




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux