[PATCH v3 0/5] Minor device-tree additions for C.H.I.P

[Jonathan McDowell <noodles@xxxxxxxx>]

This small patch series adds some improvements for the C.H.I.P DTS,
enabling bluetooth, exporting the PMIC temperature details via iio-hwmon
and finally adding the appropriate base pinmux info for an external MMC
card. As a pre-requisite for the Bluetooth it also adds support to the
AXP209 driver for GPIO3, which is the Bluetooth device wakeup line.

v3:
- Add Reviewed-By/Acked-Bys
- Drop redundant else
- Switch to GENMASK/decimal values for GPIO3 function defs
v2:
- Fix missing ; on bluetooth stanza in DTS
- Add device/host wake GPIOs for Bluetooth device
- Add omit-if-no-ref on the port E pinmux stanza
- Rename axp20x_temp to pmic-temp
- Add AXP209 GPIO3 support

Jonathan McDowell (5):
  dt-bindings: gpio: Add GPIO3 for AXP209 GPIO binding schema
  pinctrl: axp209: Add support for GPIO3 on the AXP209
  ARM: dts: sun5i: chip: Enable bluetooth
  ARM: dts: sun5i: Add port E pinmux settings for mmc2
  ARM: dts: axp209: Add iio-hwmon node for internal temperature

 .../bindings/gpio/x-powers,axp209-gpio.yaml   |  1 +
 arch/arm/boot/dts/axp209.dtsi                 |  7 ++++
 arch/arm/boot/dts/sun5i-r8-chip.dts           |  6 +++
 arch/arm/boot/dts/sun5i.dtsi                  |  9 ++++
 drivers/pinctrl/pinctrl-axp209.c              | 42 +++++++++++++++++++
 5 files changed, 65 insertions(+)

-- 
2.39.2