The TWL4030 GPIO driver has a custom platform data .set_up() callback to call back into the platform and do misc stuff such as hog and export a GPIO for WLAN PWR on a specific OMAP3 board. Avoid all the kludgery in the platform data and the boardfile and just put the quirks right into the driver. Make it conditional on OMAP3. I think the exported GPIO is used by some kind of userspace so ordinary DTS hogs will probably not work. Fixes: 92bf78b33b0b ("gpio: omap: use dynamic allocation of base") Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> --- arch/arm/mach-omap2/omap_device.c | 1 - arch/arm/mach-omap2/pdata-quirks.c | 41 +----------------------------- drivers/gpio/gpio-twl4030.c | 52 ++++++++++++++++++++++++++------------ include/linux/mfd/twl.h | 3 --- 4 files changed, 37 insertions(+), 60 deletions(-) diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index 4afa2f08e668..fca7869c8075 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -244,7 +244,6 @@ static int _omap_device_notifier_call(struct notifier_block *nb, case BUS_NOTIFY_ADD_DEVICE: if (pdev->dev.of_node) omap_device_build_from_dt(pdev); - omap_auxdata_legacy_init(dev); fallthrough; default: od = to_omap_device(pdev); diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 04208cc52784..c363ad8d6a06 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -6,6 +6,7 @@ */ #include <linux/clk.h> #include <linux/davinci_emac.h> +#include <linux/gpio/machine.h> #include <linux/gpio/consumer.h> #include <linux/gpio.h> #include <linux/init.h> @@ -41,7 +42,6 @@ struct pdata_init { }; static struct of_dev_auxdata omap_auxdata_lookup[]; -static struct twl4030_gpio_platform_data twl_gpio_auxdata; #ifdef CONFIG_MACH_NOKIA_N8X0 static void __init omap2420_n8x0_legacy_init(void) @@ -98,22 +98,6 @@ static struct iommu_platform_data omap3_iommu_isp_pdata = { }; #endif -static int omap3_sbc_t3730_twl_callback(struct device *dev, - unsigned gpio, - unsigned ngpio) -{ - int res; - - res = gpio_request_one(gpio + 2, GPIOF_OUT_INIT_HIGH, - "wlan pwr"); - if (res) - return res; - - gpiod_export(gpio_to_desc(gpio), 0); - - return 0; -} - static void __init omap3_sbc_t3x_usb_hub_init(int gpio, char *hub_name) { int err = gpio_request_one(gpio, GPIOF_OUT_INIT_LOW, hub_name); @@ -131,11 +115,6 @@ static void __init omap3_sbc_t3x_usb_hub_init(int gpio, char *hub_name) msleep(1); } -static void __init omap3_sbc_t3730_twl_init(void) -{ - twl_gpio_auxdata.setup = omap3_sbc_t3730_twl_callback; -} - static void __init omap3_sbc_t3730_legacy_init(void) { omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub"); @@ -393,21 +372,6 @@ static struct ti_prm_platform_data ti_prm_pdata = { .clkdm_lookup = clkdm_lookup, }; -/* - * GPIOs for TWL are initialized by the I2C bus and need custom - * handing until DSS has device tree bindings. - */ -void omap_auxdata_legacy_init(struct device *dev) -{ - if (dev->platform_data) - return; - - if (strcmp("twl4030-gpio", dev_name(dev))) - return; - - dev->platform_data = &twl_gpio_auxdata; -} - #if defined(CONFIG_ARCH_OMAP3) && IS_ENABLED(CONFIG_SND_SOC_OMAP_MCBSP) static struct omap_mcbsp_platform_data mcbsp_pdata; static void __init omap3_mcbsp_init(void) @@ -427,9 +391,6 @@ static struct pdata_init auxdata_quirks[] __initdata = { { "nokia,n800", omap2420_n8x0_legacy_init, }, { "nokia,n810", omap2420_n8x0_legacy_init, }, { "nokia,n810-wimax", omap2420_n8x0_legacy_init, }, -#endif -#ifdef CONFIG_ARCH_OMAP3 - { "compulab,omap3-sbc-t3730", omap3_sbc_t3730_twl_init, }, #endif { /* sentinel */ }, }; diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c index c1bb2c3ca6f2..446599ac234a 100644 --- a/drivers/gpio/gpio-twl4030.c +++ b/drivers/gpio/gpio-twl4030.c @@ -17,7 +17,9 @@ #include <linux/interrupt.h> #include <linux/kthread.h> #include <linux/irq.h> +#include <linux/gpio/machine.h> #include <linux/gpio/driver.h> +#include <linux/gpio/consumer.h> #include <linux/platform_device.h> #include <linux/of.h> #include <linux/irqdomain.h> @@ -465,8 +467,7 @@ static int gpio_twl4030_debounce(u32 debounce, u8 mmc_cd) REG_GPIO_DEBEN1, 3); } -static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev, - struct twl4030_gpio_platform_data *pdata) +static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev) { struct twl4030_gpio_platform_data *omap_twl_info; @@ -474,9 +475,6 @@ static struct twl4030_gpio_platform_data *of_gpio_twl4030(struct device *dev, if (!omap_twl_info) return NULL; - if (pdata) - *omap_twl_info = *pdata; - omap_twl_info->use_leds = of_property_read_bool(dev->of_node, "ti,use-leds"); @@ -504,9 +502,18 @@ static int gpio_twl4030_remove(struct platform_device *pdev) return 0; } +/* Called from the registered devm action */ +static void gpio_twl4030_power_off_action(void *data) +{ + struct gpio_desc *d = data; + + gpiod_unexport(d); + gpiochip_free_own_desc(d); +} + static int gpio_twl4030_probe(struct platform_device *pdev) { - struct twl4030_gpio_platform_data *pdata = dev_get_platdata(&pdev->dev); + struct twl4030_gpio_platform_data *pdata; struct device_node *node = pdev->dev.of_node; struct gpio_twl4030_priv *priv; int ret, irq_base; @@ -546,9 +553,7 @@ static int gpio_twl4030_probe(struct platform_device *pdev) mutex_init(&priv->mutex); - if (node) - pdata = of_gpio_twl4030(&pdev->dev, pdata); - + pdata = of_gpio_twl4030(&pdev->dev); if (pdata == NULL) { dev_err(&pdev->dev, "Platform data is missing\n"); return -ENXIO; @@ -585,17 +590,32 @@ static int gpio_twl4030_probe(struct platform_device *pdev) goto out; } - platform_set_drvdata(pdev, priv); + /* + * Special quirk for the OMAP3 to hog and export a WLAN power + * GPIO. + */ + if (IS_ENABLED(CONFIG_ARCH_OMAP3) && + of_machine_is_compatible("compulab,omap3-sbc-t3730")) { + struct gpio_desc *d; - if (pdata->setup) { - int status; + d = gpiochip_request_own_desc(&priv->gpio_chip, + 2, "wlan pwr", + GPIO_ACTIVE_HIGH, + GPIOD_OUT_HIGH); + if (IS_ERR(d)) + return dev_err_probe(&pdev->dev, PTR_ERR(d), + "unable to hog wlan pwr GPIO\n"); + + gpiod_export(d, 0); + + ret = devm_add_action_or_reset(&pdev->dev, gpio_twl4030_power_off_action, d); + if (ret) + return dev_err_probe(&pdev->dev, ret, + "failed to install power off handler\n"); - status = pdata->setup(&pdev->dev, priv->gpio_chip.base, - TWL4030_GPIO_MAX); - if (status) - dev_dbg(&pdev->dev, "setup --> %d\n", status); } + platform_set_drvdata(pdev, priv); out: return ret; } diff --git a/include/linux/mfd/twl.h b/include/linux/mfd/twl.h index 6e3d99b7a0ee..c062d91a67d9 100644 --- a/include/linux/mfd/twl.h +++ b/include/linux/mfd/twl.h @@ -593,9 +593,6 @@ struct twl4030_gpio_platform_data { */ u32 pullups; u32 pulldowns; - - int (*setup)(struct device *dev, - unsigned gpio, unsigned ngpio); }; struct twl4030_madc_platform_data { -- 2.34.1