[PATCH v6 1/2] gpio: mxc: Protect GPIO irqchip RMW with bgpio spinlock

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The driver currently performs register read-modify-write without locking
in its irqchip part, this could lead to a race condition when configuring
interrupt mode setting. Add the missing bgpio spinlock lock/unlock around
the register read-modify-write.

Reviewed-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Reviewed-by: Marc Zyngier <maz@xxxxxxxxxx>
Fixes: 07bd1a6cc7cbb ("MXC arch: Add gpio support for the whole platform")
Signed-off-by: Marek Vasut <marex@xxxxxxx>
---
Cc: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
Cc: Linus Walleij <linus.walleij@xxxxxxxxxx>
Cc: Loic Poulain <loic.poulain@xxxxxxxxxx>
Cc: Marc Zyngier <maz@xxxxxxxxxx>
Cc: NXP Linux Team <linux-imx@xxxxxxx>
Cc: Peng Fan <peng.fan@xxxxxxx>
Cc: Shawn Guo <shawnguo@xxxxxxxxxx>
---
V3: New patch
V4: Include linux/spinlock.h
V5: Use raw_spinlock per 3c938cc5cebcb ("gpio: use raw spinlock for gpio chip shadowed data")
V6: No change
---
 drivers/gpio/gpio-mxc.c | 11 +++++++++++
 1 file changed, 11 insertions(+)

diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index c871602fc5ba9..6cc98a5684ae1 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -18,6 +18,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
+#include <linux/spinlock.h>
 #include <linux/syscore_ops.h>
 #include <linux/gpio/driver.h>
 #include <linux/of.h>
@@ -147,6 +148,7 @@ static int gpio_set_irq_type(struct irq_data *d, u32 type)
 {
 	struct irq_chip_generic *gc = irq_data_get_irq_chip_data(d);
 	struct mxc_gpio_port *port = gc->private;
+	unsigned long flags;
 	u32 bit, val;
 	u32 gpio_idx = d->hwirq;
 	int edge;
@@ -185,6 +187,8 @@ static int gpio_set_irq_type(struct irq_data *d, u32 type)
 		return -EINVAL;
 	}
 
+	raw_spin_lock_irqsave(&port->gc.bgpio_lock, flags);
+
 	if (GPIO_EDGE_SEL >= 0) {
 		val = readl(port->base + GPIO_EDGE_SEL);
 		if (edge == GPIO_INT_BOTH_EDGES)
@@ -204,15 +208,20 @@ static int gpio_set_irq_type(struct irq_data *d, u32 type)
 
 	writel(1 << gpio_idx, port->base + GPIO_ISR);
 
+	raw_spin_unlock_irqrestore(&port->gc.bgpio_lock, flags);
+
 	return 0;
 }
 
 static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
 {
 	void __iomem *reg = port->base;
+	unsigned long flags;
 	u32 bit, val;
 	int edge;
 
+	raw_spin_lock_irqsave(&port->gc.bgpio_lock, flags);
+
 	reg += GPIO_ICR1 + ((gpio & 0x10) >> 2); /* lower or upper register */
 	bit = gpio & 0xf;
 	val = readl(reg);
@@ -230,6 +239,8 @@ static void mxc_flip_edge(struct mxc_gpio_port *port, u32 gpio)
 		return;
 	}
 	writel(val | (edge << (bit << 1)), reg);
+
+	raw_spin_unlock_irqrestore(&port->gc.bgpio_lock, flags);
 }
 
 /* handle 32 interrupts in one status register */
-- 
2.35.1




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux