Re: [PATCH 2/2] dt-bindings: pinctrl: qcom,sc7180: convert to dtschema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 12/10/2022 13:42, Doug Anderson wrote:
> Hi,
> 
> On Fri, Oct 7, 2022 at 7:51 AM Krzysztof Kozlowski
> <krzysztof.kozlowski@xxxxxxxxxx> wrote:
>>
>> +      drive-strength:
>> +        enum: [2, 4, 6, 8, 10, 12, 14, 16]
>> +        default: 2
>> +        description:
>> +          Selects the drive strength for the specified pins, in mA.
> 
> The "default" of 2 is not correct. Please see commit 768f8d8e45f9
> ("dt-bindings: pinctrl: drive-strength doesn't default to 2 if
> unspecified")

Uh, you're right. This was copied to one binding and then I copied to
another, and another...

> 
> In fact, are you sure this even needs to be replicated here? This is
> part of the common "qcom,tlmm-common.yaml" bindings file, isn't it?

If the value was correct, it might be per-SoC specific, but that's
another question. The default value is actually unknown, so I'll remove it.

Best regards,
Krzysztof




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux