Re: [PATCH v2 06/33] ARM: dts: qcom: msm8974: align TLMM pin configuration with DT schema

[Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>]

On 26.09.2022 09:43, Krzysztof Kozlowski wrote:
> DT schema expects TLMM pin configuration nodes to be named with
> '-state' suffix and their optional children with '-pins' suffix.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>

Konrad
>  .../qcom-msm8974-lge-nexus5-hammerhead.dts    | 30 +++++++++----------
>  1 file changed, 15 insertions(+), 15 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
> index 6daceaa87802..8138f37233aa 100644
> --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
> +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
> @@ -573,43 +573,43 @@ bcrmf@1 {
>  };
>  
>  &tlmm {
> -	sdc1_on: sdc1-on {
> -		clk {
> +	sdc1_on: sdc1-on-state {
> +		clk-pins {
>  			pins = "sdc1_clk";
>  			drive-strength = <16>;
>  			bias-disable;
>  		};
>  
> -		cmd-data {
> +		cmd-data-pins {
>  			pins = "sdc1_cmd", "sdc1_data";
>  			drive-strength = <10>;
>  			bias-pull-up;
>  		};
>  	};
>  
> -	sdc2_on: sdc2-on {
> -		clk {
> +	sdc2_on: sdc2-on-state {
> +		clk-pins {
>  			pins = "sdc2_clk";
>  			drive-strength = <6>;
>  			bias-disable;
>  		};
>  
> -		cmd-data {
> +		cmd-data-pins {
>  			pins = "sdc2_cmd", "sdc2_data";
>  			drive-strength = <6>;
>  			bias-pull-up;
>  		};
>  	};
>  
> -	mpu6515_pin: mpu6515 {
> +	mpu6515_pin: mpu6515-state {
>  		pins = "gpio73";
>  		function = "gpio";
>  		bias-disable;
>  		input-enable;
>  	};
>  
> -	touch_pin: touch {
> -		int {
> +	touch_pin: touch-state {
> +		int-pins {
>  			pins = "gpio5";
>  			function = "gpio";
>  
> @@ -618,7 +618,7 @@ int {
>  			input-enable;
>  		};
>  
> -		reset {
> +		reset-pins {
>  			pins = "gpio8";
>  			function = "gpio";
>  
> @@ -627,25 +627,25 @@ reset {
>  		};
>  	};
>  
> -	panel_pin: panel {
> +	panel_pin: panel-state {
>  		pins = "gpio12";
>  		function = "mdp_vsync";
>  		drive-strength = <2>;
>  		bias-disable;
>  	};
>  
> -	bt_pin: bt {
> -		hostwake {
> +	bt_pin: bt-state {
> +		hostwake-pins {
>  			pins = "gpio42";
>  			function = "gpio";
>  		};
>  
> -		devwake {
> +		devwake-pins {
>  			pins = "gpio62";
>  			function = "gpio";
>  		};
>  
> -		shutdown {
> +		shutdown-pins {
>  			pins = "gpio41";
>  			function = "gpio";
>  		};