Re: [PATCH v2 05/33] ARM: dts: qcom: msm8226: align TLMM pin configuration with DT schema

[Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>]

On 26.09.2022 09:43, Krzysztof Kozlowski wrote:
> DT schema expects TLMM pin configuration nodes to be named with
> '-state' suffix and their optional children with '-pins' suffix.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>

Konrad
>  arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts |  6 +++---
>  arch/arm/boot/dts/qcom-msm8226.dtsi         | 24 ++++++++++-----------
>  2 files changed, 15 insertions(+), 15 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
> index 193569f0ca5f..02bef5870526 100644
> --- a/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
> +++ b/arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts
> @@ -299,8 +299,8 @@ bluetooth_default_state: bluetooth-default-state {
>  		input-enable;
>  	};
>  
> -	touch_pins: touch {
> -		irq {
> +	touch_pins: touch-state {
> +		irq-pins {
>  			pins = "gpio17";
>  			function = "gpio";
>  
> @@ -309,7 +309,7 @@ irq {
>  			input-enable;
>  		};
>  
> -		reset {
> +		reset-pins {
>  			pins = "gpio16";
>  			function = "gpio";
>  
> diff --git a/arch/arm/boot/dts/qcom-msm8226.dtsi b/arch/arm/boot/dts/qcom-msm8226.dtsi
> index cf2d56929428..3b6e746a4af9 100644
> --- a/arch/arm/boot/dts/qcom-msm8226.dtsi
> +++ b/arch/arm/boot/dts/qcom-msm8226.dtsi
> @@ -354,35 +354,35 @@ tlmm: pinctrl@fd510000 {
>  			#interrupt-cells = <2>;
>  			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
>  
> -			blsp1_i2c1_pins: blsp1-i2c1 {
> +			blsp1_i2c1_pins: blsp1-i2c1-state {
>  				pins = "gpio2", "gpio3";
>  				function = "blsp_i2c1";
>  				drive-strength = <2>;
>  				bias-disable;
>  			};
>  
> -			blsp1_i2c2_pins: blsp1-i2c2 {
> +			blsp1_i2c2_pins: blsp1-i2c2-state {
>  				pins = "gpio6", "gpio7";
>  				function = "blsp_i2c2";
>  				drive-strength = <2>;
>  				bias-disable;
>  			};
>  
> -			blsp1_i2c3_pins: blsp1-i2c3 {
> +			blsp1_i2c3_pins: blsp1-i2c3-state {
>  				pins = "gpio10", "gpio11";
>  				function = "blsp_i2c3";
>  				drive-strength = <2>;
>  				bias-disable;
>  			};
>  
> -			blsp1_i2c4_pins: blsp1-i2c4 {
> +			blsp1_i2c4_pins: blsp1-i2c4-state {
>  				pins = "gpio14", "gpio15";
>  				function = "blsp_i2c4";
>  				drive-strength = <2>;
>  				bias-disable;
>  			};
>  
> -			blsp1_i2c5_pins: blsp1-i2c5 {
> +			blsp1_i2c5_pins: blsp1-i2c5-state {
>  				pins = "gpio18", "gpio19";
>  				function = "blsp_i2c5";
>  				drive-strength = <2>;
> @@ -390,13 +390,13 @@ blsp1_i2c5_pins: blsp1-i2c5 {
>  			};
>  
>  			sdhc1_default_state: sdhc1-default-state {
> -				clk {
> +				clk-pins {
>  					pins = "sdc1_clk";
>  					drive-strength = <10>;
>  					bias-disable;
>  				};
>  
> -				cmd-data {
> +				cmd-data-pins {
>  					pins = "sdc1_cmd", "sdc1_data";
>  					drive-strength = <10>;
>  					bias-pull-up;
> @@ -404,13 +404,13 @@ cmd-data {
>  			};
>  
>  			sdhc2_default_state: sdhc2-default-state {
> -				clk {
> +				clk-pins {
>  					pins = "sdc2_clk";
>  					drive-strength = <10>;
>  					bias-disable;
>  				};
>  
> -				cmd-data {
> +				cmd-data-pins {
>  					pins = "sdc2_cmd", "sdc2_data";
>  					drive-strength = <10>;
>  					bias-pull-up;
> @@ -418,21 +418,21 @@ cmd-data {
>  			};
>  
>  			sdhc3_default_state: sdhc3-default-state {
> -				clk {
> +				clk-pins {
>  					pins = "gpio44";
>  					function = "sdc3";
>  					drive-strength = <8>;
>  					bias-disable;
>  				};
>  
> -				cmd {
> +				cmd-pins {
>  					pins = "gpio43";
>  					function = "sdc3";
>  					drive-strength = <8>;
>  					bias-pull-up;
>  				};
>  
> -				data {
> +				data-pins {
>  					pins = "gpio39", "gpio40", "gpio41", "gpio42";
>  					function = "sdc3";
>  					drive-strength = <8>;