Re: [PATCH v2 02/33] arm64: dts: qcom: ipq6018: align TLMM pin configuration with DT schema

[Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>]

On 26.09.2022 09:43, Krzysztof Kozlowski wrote:
> DT schema expects TLMM pin configuration nodes to be named with
> '-state' suffix and their optional children with '-pins' suffix.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
> ---
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>

Konrad
>  arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts | 4 ++--
>  arch/arm64/boot/dts/qcom/ipq6018.dtsi        | 4 ++--
>  2 files changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
> index afc2dc79767d..e1fe7d598580 100644
> --- a/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
> +++ b/arch/arm64/boot/dts/qcom/ipq6018-cp01-c1.dts
> @@ -51,13 +51,13 @@ flash@0 {
>  };
>  
>  &tlmm {
> -	i2c_1_pins: i2c-1-pins {
> +	i2c_1_pins: i2c-1-state {
>  		pins = "gpio42", "gpio43";
>  		function = "blsp2_i2c";
>  		drive-strength = <8>;
>  	};
>  
> -	spi_0_pins: spi-0-pins {
> +	spi_0_pins: spi-0-state {
>  		pins = "gpio38", "gpio39", "gpio40", "gpio41";
>  		function = "blsp1_spi";
>  		drive-strength = <8>;
> diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> index a7c7ca980a71..9b9f778090e1 100644
> --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
> @@ -218,14 +218,14 @@ tlmm: pinctrl@1000000 {
>  			interrupt-controller;
>  			#interrupt-cells = <2>;
>  
> -			serial_3_pins: serial3-pinmux {
> +			serial_3_pins: serial3-state {
>  				pins = "gpio44", "gpio45";
>  				function = "blsp2_uart";
>  				drive-strength = <8>;
>  				bias-pull-down;
>  			};
>  
> -			qpic_pins: qpic-pins {
> +			qpic_pins: qpic-state {
>  				pins = "gpio1", "gpio3", "gpio4",
>  					"gpio5", "gpio6", "gpio7",
>  					"gpio8", "gpio10", "gpio11",