The blamed commit introduce support for lan966x which use the same pinconf_ops as sparx5. The problem is that pinconf_ops is specific to sparx5. More precisely the offset of the bits in the pincfg register are different and also lan966x doesn't have support for PIN_CONFIG_INPUT_SCHMITT_ENABLE. Fix this by making pinconf_ops more generic such that it can be also used by lan966x. This is done by introducing 'ocelot_pincfg_data' which contains the offset and what is supported for each SOC. Fixes: 531d6ab36571 ("pinctrl: ocelot: Extend support for lan966x") Signed-off-by: Horatiu Vultur <horatiu.vultur@xxxxxxxxxxxxx> --- drivers/pinctrl/pinctrl-ocelot.c | 194 ++++++++++++++++++++----------- 1 file changed, 123 insertions(+), 71 deletions(-) diff --git a/drivers/pinctrl/pinctrl-ocelot.c b/drivers/pinctrl/pinctrl-ocelot.c index 5f4a8c5c6650..873bba245522 100644 --- a/drivers/pinctrl/pinctrl-ocelot.c +++ b/drivers/pinctrl/pinctrl-ocelot.c @@ -29,19 +29,12 @@ #define ocelot_clrsetbits(addr, clear, set) \ writel((readl(addr) & ~(clear)) | (set), (addr)) -/* PINCONFIG bits (sparx5 only) */ enum { PINCONF_BIAS, PINCONF_SCHMITT, PINCONF_DRIVE_STRENGTH, }; -#define BIAS_PD_BIT BIT(4) -#define BIAS_PU_BIT BIT(3) -#define BIAS_BITS (BIAS_PD_BIT|BIAS_PU_BIT) -#define SCHMITT_BIT BIT(2) -#define DRIVE_BITS GENMASK(1, 0) - /* GPIO standard registers */ #define OCELOT_GPIO_OUT_SET 0x0 #define OCELOT_GPIO_OUT_CLR 0x4 @@ -321,6 +314,13 @@ struct ocelot_pin_caps { unsigned char a_functions[OCELOT_FUNC_PER_PIN]; /* Additional functions */ }; +struct ocelot_pincfg_data { + u8 pd_bit; + u8 pu_bit; + u8 drive_bits; + u8 schmitt_bit; +}; + struct ocelot_pinctrl { struct device *dev; struct pinctrl_dev *pctl; @@ -328,10 +328,16 @@ struct ocelot_pinctrl { struct regmap *map; struct regmap *pincfg; struct pinctrl_desc *desc; + const struct ocelot_pincfg_data *pincfg_data; struct ocelot_pmx_func func[FUNC_MAX]; u8 stride; }; +struct ocelot_match_data { + struct pinctrl_desc desc; + struct ocelot_pincfg_data pincfg_data; +}; + #define LUTON_P(p, f0, f1) \ static struct ocelot_pin_caps luton_pin_##p = { \ .pin = p, \ @@ -1325,6 +1331,7 @@ static int ocelot_hw_get_value(struct ocelot_pinctrl *info, int ret = -EOPNOTSUPP; if (info->pincfg) { + const struct ocelot_pincfg_data *opd = info->pincfg_data; u32 regcfg; ret = regmap_read(info->pincfg, pin, ®cfg); @@ -1334,15 +1341,15 @@ static int ocelot_hw_get_value(struct ocelot_pinctrl *info, ret = 0; switch (reg) { case PINCONF_BIAS: - *val = regcfg & BIAS_BITS; + *val = regcfg & (opd->pd_bit | opd->pu_bit); break; case PINCONF_SCHMITT: - *val = regcfg & SCHMITT_BIT; + *val = regcfg & opd->schmitt_bit; break; case PINCONF_DRIVE_STRENGTH: - *val = regcfg & DRIVE_BITS; + *val = regcfg & opd->drive_bits; break; default: @@ -1379,23 +1386,27 @@ static int ocelot_hw_set_value(struct ocelot_pinctrl *info, int ret = -EOPNOTSUPP; if (info->pincfg) { + const struct ocelot_pincfg_data *opd = info->pincfg_data; ret = 0; switch (reg) { case PINCONF_BIAS: - ret = ocelot_pincfg_clrsetbits(info, pin, BIAS_BITS, + ret = ocelot_pincfg_clrsetbits(info, pin, + opd->pd_bit | opd->pu_bit, val); break; case PINCONF_SCHMITT: - ret = ocelot_pincfg_clrsetbits(info, pin, SCHMITT_BIT, + ret = ocelot_pincfg_clrsetbits(info, pin, + opd->schmitt_bit, val); break; case PINCONF_DRIVE_STRENGTH: if (val <= 3) ret = ocelot_pincfg_clrsetbits(info, pin, - DRIVE_BITS, val); + opd->drive_bits, + val); else ret = -EINVAL; break; @@ -1425,17 +1436,20 @@ static int ocelot_pinconf_get(struct pinctrl_dev *pctldev, if (param == PIN_CONFIG_BIAS_DISABLE) val = (val == 0); else if (param == PIN_CONFIG_BIAS_PULL_DOWN) - val = (val & BIAS_PD_BIT ? true : false); + val = !!(val & info->pincfg_data->pd_bit); else /* PIN_CONFIG_BIAS_PULL_UP */ - val = (val & BIAS_PU_BIT ? true : false); + val = !!(val & info->pincfg_data->pu_bit); break; case PIN_CONFIG_INPUT_SCHMITT_ENABLE: + if (!info->pincfg_data->schmitt_bit) + return -EOPNOTSUPP; + err = ocelot_hw_get_value(info, pin, PINCONF_SCHMITT, &val); if (err) return err; - val = (val & SCHMITT_BIT ? true : false); + val = !!(val & info->pincfg_data->schmitt_bit); break; case PIN_CONFIG_DRIVE_STRENGTH: @@ -1491,8 +1505,8 @@ static int ocelot_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, case PIN_CONFIG_BIAS_PULL_UP: case PIN_CONFIG_BIAS_PULL_DOWN: arg = (param == PIN_CONFIG_BIAS_DISABLE) ? 0 : - (param == PIN_CONFIG_BIAS_PULL_UP) ? BIAS_PU_BIT : - BIAS_PD_BIT; + (param == PIN_CONFIG_BIAS_PULL_UP) ? info->pincfg_data->pu_bit : + info->pincfg_data->pd_bit; err = ocelot_hw_set_value(info, pin, PINCONF_BIAS, arg); if (err) @@ -1501,7 +1515,10 @@ static int ocelot_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin, break; case PIN_CONFIG_INPUT_SCHMITT_ENABLE: - arg = arg ? SCHMITT_BIT : 0; + if (!info->pincfg_data->schmitt_bit) + return -EOPNOTSUPP; + + arg = arg ? info->pincfg_data->schmitt_bit : 0; err = ocelot_hw_set_value(info, pin, PINCONF_SCHMITT, arg); if (err) @@ -1562,69 +1579,94 @@ static const struct pinctrl_ops ocelot_pctl_ops = { .dt_free_map = pinconf_generic_dt_free_map, }; -static struct pinctrl_desc luton_desc = { - .name = "luton-pinctrl", - .pins = luton_pins, - .npins = ARRAY_SIZE(luton_pins), - .pctlops = &ocelot_pctl_ops, - .pmxops = &ocelot_pmx_ops, - .owner = THIS_MODULE, +static struct ocelot_match_data luton_desc = { + .desc = { + .name = "luton-pinctrl", + .pins = luton_pins, + .npins = ARRAY_SIZE(luton_pins), + .pctlops = &ocelot_pctl_ops, + .pmxops = &ocelot_pmx_ops, + .owner = THIS_MODULE, + }, }; -static struct pinctrl_desc serval_desc = { - .name = "serval-pinctrl", - .pins = serval_pins, - .npins = ARRAY_SIZE(serval_pins), - .pctlops = &ocelot_pctl_ops, - .pmxops = &ocelot_pmx_ops, - .owner = THIS_MODULE, +static struct ocelot_match_data serval_desc = { + .desc = { + .name = "serval-pinctrl", + .pins = serval_pins, + .npins = ARRAY_SIZE(serval_pins), + .pctlops = &ocelot_pctl_ops, + .pmxops = &ocelot_pmx_ops, + .owner = THIS_MODULE, + }, }; -static struct pinctrl_desc ocelot_desc = { - .name = "ocelot-pinctrl", - .pins = ocelot_pins, - .npins = ARRAY_SIZE(ocelot_pins), - .pctlops = &ocelot_pctl_ops, - .pmxops = &ocelot_pmx_ops, - .owner = THIS_MODULE, +static struct ocelot_match_data ocelot_desc = { + .desc = { + .name = "ocelot-pinctrl", + .pins = ocelot_pins, + .npins = ARRAY_SIZE(ocelot_pins), + .pctlops = &ocelot_pctl_ops, + .pmxops = &ocelot_pmx_ops, + .owner = THIS_MODULE, + }, }; -static struct pinctrl_desc jaguar2_desc = { - .name = "jaguar2-pinctrl", - .pins = jaguar2_pins, - .npins = ARRAY_SIZE(jaguar2_pins), - .pctlops = &ocelot_pctl_ops, - .pmxops = &ocelot_pmx_ops, - .owner = THIS_MODULE, +static struct ocelot_match_data jaguar2_desc = { + .desc = { + .name = "jaguar2-pinctrl", + .pins = jaguar2_pins, + .npins = ARRAY_SIZE(jaguar2_pins), + .pctlops = &ocelot_pctl_ops, + .pmxops = &ocelot_pmx_ops, + .owner = THIS_MODULE, + }, }; -static struct pinctrl_desc servalt_desc = { - .name = "servalt-pinctrl", - .pins = servalt_pins, - .npins = ARRAY_SIZE(servalt_pins), - .pctlops = &ocelot_pctl_ops, - .pmxops = &ocelot_pmx_ops, - .owner = THIS_MODULE, +static struct ocelot_match_data servalt_desc = { + .desc = { + .name = "servalt-pinctrl", + .pins = servalt_pins, + .npins = ARRAY_SIZE(servalt_pins), + .pctlops = &ocelot_pctl_ops, + .pmxops = &ocelot_pmx_ops, + .owner = THIS_MODULE, + }, }; -static struct pinctrl_desc sparx5_desc = { - .name = "sparx5-pinctrl", - .pins = sparx5_pins, - .npins = ARRAY_SIZE(sparx5_pins), - .pctlops = &ocelot_pctl_ops, - .pmxops = &ocelot_pmx_ops, - .confops = &ocelot_confops, - .owner = THIS_MODULE, +static struct ocelot_match_data sparx5_desc = { + .desc = { + .name = "sparx5-pinctrl", + .pins = sparx5_pins, + .npins = ARRAY_SIZE(sparx5_pins), + .pctlops = &ocelot_pctl_ops, + .pmxops = &ocelot_pmx_ops, + .confops = &ocelot_confops, + .owner = THIS_MODULE, + }, + .pincfg_data = { + .pd_bit = BIT(4), + .pu_bit = BIT(3), + .drive_bits = GENMASK(1, 0), + .schmitt_bit = BIT(2), + }, }; -static struct pinctrl_desc lan966x_desc = { - .name = "lan966x-pinctrl", - .pins = lan966x_pins, - .npins = ARRAY_SIZE(lan966x_pins), - .pctlops = &ocelot_pctl_ops, - .pmxops = &lan966x_pmx_ops, - .confops = &ocelot_confops, - .owner = THIS_MODULE, +static struct ocelot_match_data lan966x_desc = { + .desc = { + .name = "lan966x-pinctrl", + .pins = lan966x_pins, + .npins = ARRAY_SIZE(lan966x_pins), + .pctlops = &ocelot_pctl_ops, + .pmxops = &lan966x_pmx_ops, + .confops = &ocelot_confops, + .owner = THIS_MODULE, + }, + .pincfg_data = { + .pd_bit = BIT(3), + .pu_bit = BIT(2), + .drive_bits = GENMASK(1, 0), + }, }; static int ocelot_create_group_func_map(struct device *dev, @@ -1913,6 +1955,7 @@ static struct regmap *ocelot_pinctrl_create_pincfg(struct platform_device *pdev) static int ocelot_pinctrl_probe(struct platform_device *pdev) { + const struct ocelot_match_data *data; struct device *dev = &pdev->dev; struct ocelot_pinctrl *info; struct reset_control *reset; @@ -1929,7 +1972,16 @@ static int ocelot_pinctrl_probe(struct platform_device *pdev) if (!info) return -ENOMEM; - info->desc = (struct pinctrl_desc *)device_get_match_data(dev); + data = device_get_match_data(dev); + if (!data) + return -EINVAL; + + info->desc = devm_kmemdup(dev, &data->desc, sizeof(*info->desc), + GFP_KERNEL); + if (!info->desc) + return -ENOMEM; + + info->pincfg_data = &data->pincfg_data; reset = devm_reset_control_get_optional_shared(dev, "switch"); if (IS_ERR(reset)) -- 2.33.0