Re: [PATCH 2/2] gpio: Add support for SLG7XL45106 I2C GPO expander

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 6/29/22 12:15, Andy Shevchenko wrote:
On Wed, Jun 29, 2022 at 9:14 AM Michal Simek <michal.simek@xxxxxxx> wrote:
On 6/29/22 03:00, Sungbo Eo wrote:
On 2022-06-29 04:21, Andy Shevchenko wrote:
On Tue, Jun 28, 2022 at 9:13 PM Andy Shevchenko
<andy.shevchenko@xxxxxxxxx> wrote:

...

Actually, why can't pca9570 be amended to support this?

It seems the slg7xl45106 driver reads/writes a reg at 0xDB so it is not
compatible with pca9570 driver (in the current state), and (I suppose)
it could be converted to use gpio-regmap.

[1]
https://lore.kernel.org/linux-gpio/69f5d1a1970838b8c4bd8d6e8dba6cac@xxxxxxxx/

As was mentioned driver is based on pca9570 and the only important difference is
with i2c_smbus_read_byte/i2c_smbus_read_byte_data and especially
i2c_smbus_write_byte/i2c_smbus_write_byte_data.

Read can be aligned without any issue but write will have if/else because of
i2c_smbus_write_byte_data. Example below.

Something like this. If this change is fine I think there won't be any issue to
just merge it with pca9570.

Thanks, I also would like to see something as below in the result.

ok. Good.


diff --git a/drivers/gpio/gpio-slg7xl45106.c b/drivers/gpio/gpio-slg7xl45106.c
index bf25e6fb6782..b90950ae38c1 100644
--- a/drivers/gpio/gpio-slg7xl45106.c
+++ b/drivers/gpio/gpio-slg7xl45106.c
@@ -22,20 +22,24 @@
   struct slg7xl45106 {
          struct gpio_chip chip;
          struct mutex lock;      /* To protect writes */
+       u32 command;
   };

   static int slg7xl45106_read(struct slg7xl45106 *gpio)
   {
          struct i2c_client *client = to_i2c_client(gpio->chip.parent);

-       return i2c_smbus_read_byte_data(client, SLG7XL45106_GPO_REG);
+       return i2c_smbus_read_byte_data(client, gpio->command);
   }

   static int slg7xl45106_write(struct slg7xl45106 *gpio, u8 value)
   {
          struct i2c_client *client = to_i2c_client(gpio->chip.parent);

-       return i2c_smbus_write_byte_data(client, SLG7XL45106_GPO_REG, value);
+       if (gpio->command)
+               return i2c_smbus_write_byte_data(client, SLG7XL45106_GPO_REG,
value);

Missed change to gpio->command :-)

I found it too. :-)

Shubhrajyoti: Can you please merge that slg driver to 9570? That dt-binding will require small massage too.

Thanks,
Michal





[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux