[PATCH v5 8/9] ARM: dts: wpcm450-supermicro-x9sci-ln4f: Add GPIO LEDs and buttons

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The Supermicro X9SCi-LN4F server mainboard has a two LEDs and a button
under the control of the BMC. This patch makes them accessible under
Linux running on the BMC.

Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>


---
v4-v5:
- no changes

v3:
- Adjust to schema changes

v2:
- https://lore.kernel.org/lkml/20211207210823.1975632-9-j.neuschaefer@xxxxxxx/
- Adjust to new GPIO controller names
- Explicitly set pinmux to GPIO for GPIO keys and LEDs

v1:
- https://lore.kernel.org/lkml/20210602120329.2444672-9-j.neuschaefer@xxxxxxx/
---
 .../nuvoton-wpcm450-supermicro-x9sci-ln4f.dts | 43 +++++++++++++++++++
 1 file changed, 43 insertions(+)

diff --git a/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts b/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
index 83f27fbf4e939..3ee61251a16d0 100644
--- a/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
+++ b/arch/arm/boot/dts/nuvoton-wpcm450-supermicro-x9sci-ln4f.dts
@@ -8,6 +8,9 @@

 #include "nuvoton-wpcm450.dtsi"

+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/gpio/gpio.h>
+
 / {
 	model = "Supermicro X9SCi-LN4F BMC";
 	compatible = "supermicro,x9sci-ln4f-bmc", "nuvoton,wpcm450";
@@ -20,6 +23,46 @@ memory@0 {
 		device_type = "memory";
 		reg = <0 0x08000000>; /* 128 MiB */
 	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&key_pins>;
+
+		uid {
+			label = "UID button";
+			linux,code = <KEY_HOME>;
+			gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		uid {
+			label = "UID";
+			gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		heartbeat {
+			label = "heartbeat";
+			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&pinctrl {
+	key_pins: mux-keys {
+		groups = "gspi", "sspi";
+		function = "gpio";
+	};
+
+	led_pins: mux-leds {
+		groups = "hg3", "hg0", "pwm4";
+		function = "gpio";
+	};
 };

 &serial0 {
--
2.34.1





[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux