There are some special clock amendments for two machines formerly detected by their machine_is() boardfile macro. They are now migrated to device tree so use of_machine_is_compatible() instead. Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx> --- drivers/gpio/Kconfig | 1 - drivers/gpio/gpio-ixp4xx.c | 5 ++--- 2 files changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 1c211b4c63be..6e5563504348 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -343,7 +343,6 @@ config GPIO_IOP config GPIO_IXP4XX bool "Intel IXP4xx GPIO" - depends on ARM # For <asm/mach-types.h> depends on ARCH_IXP4XX select GPIO_GENERIC select GPIOLIB_IRQCHIP diff --git a/drivers/gpio/gpio-ixp4xx.c b/drivers/gpio/gpio-ixp4xx.c index b3b050604e0b..1acda980d119 100644 --- a/drivers/gpio/gpio-ixp4xx.c +++ b/drivers/gpio/gpio-ixp4xx.c @@ -17,8 +17,6 @@ /* Include that go away with DT transition */ #include <linux/irqchip/irq-ixp4xx.h> -#include <asm/mach-types.h> - #define IXP4XX_REG_GPOUT 0x00 #define IXP4XX_REG_GPOE 0x04 #define IXP4XX_REG_GPIN 0x08 @@ -240,7 +238,8 @@ static int ixp4xx_gpio_probe(struct platform_device *pdev) * Make sure GPIO 14 and 15 are NOT used as clocks but GPIO on * specific machines. */ - if (machine_is_dsmg600() || machine_is_nas100d()) + if (of_machine_is_compatible("dlink,dsm-g600-a") || + of_machine_is_compatible("iom,nas-100d")) __raw_writel(0x0, g->base + IXP4XX_REG_GPCLK); /* -- 2.34.1