Re: [PATCH 5/9] arm64: dts: rockchip: add rk3568 tsadc nodes

[Peter Geis <pgwipeout@xxxxxxxxx>]

On Wed, Jul 28, 2021 at 10:46 AM Heiko Stübner <heiko@xxxxxxxxx> wrote:
>
> Am Mittwoch, 28. Juli 2021, 15:55:30 CEST schrieb Peter Geis:
> > Add the thermal and tsadc nodes to the rk3568 device tree.
> > There are two sensors, one for the cpu, one for the gpu.
> >
> > Signed-off-by: Peter Geis <pgwipeout@xxxxxxxxx>
> > ---
> >  .../boot/dts/rockchip/rk3568-pinctrl.dtsi     |  6 ++
> >  arch/arm64/boot/dts/rockchip/rk356x.dtsi      | 71 +++++++++++++++++++
> >  2 files changed, 77 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi
> > index a588ca95ace2..b464c7bda1f7 100644
> > --- a/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi
> > +++ b/arch/arm64/boot/dts/rockchip/rk3568-pinctrl.dtsi
> > @@ -2420,6 +2420,12 @@ spi3m1_cs1: spi3m1-cs1 {
> >       };
> >
> >       tsadc {
> > +             /omit-if-no-ref/
> > +             tsadc_gpio: tsadc-gpio {
> > +                     rockchip,pins =
> > +                             <0 RK_PA1 0 &pcfg_pull_none>;
> > +             };
> > +
> >               /omit-if-no-ref/
> >               tsadcm0_shut: tsadcm0-shut {
> >                       rockchip,pins =
> > diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> > index 77c679304916..0905fac0726a 100644
> > --- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> > +++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
> > @@ -51,6 +51,7 @@ cpu0: cpu@0 {
> >                       compatible = "arm,cortex-a55";
> >                       reg = <0x0 0x0>;
> >                       clocks = <&scmi_clk 0>;
> > +                     #cooling-cells = <2>;
> >                       enable-method = "psci";
> >                       operating-points-v2 = <&cpu0_opp_table>;
> >               };
> > @@ -59,6 +60,7 @@ cpu1: cpu@100 {
> >                       device_type = "cpu";
> >                       compatible = "arm,cortex-a55";
> >                       reg = <0x0 0x100>;
> > +                     #cooling-cells = <2>;
> >                       enable-method = "psci";
> >                       operating-points-v2 = <&cpu0_opp_table>;
> >               };
> > @@ -67,6 +69,7 @@ cpu2: cpu@200 {
> >                       device_type = "cpu";
> >                       compatible = "arm,cortex-a55";
> >                       reg = <0x0 0x200>;
> > +                     #cooling-cells = <2>;
> >                       enable-method = "psci";
> >                       operating-points-v2 = <&cpu0_opp_table>;
> >               };
> > @@ -75,6 +78,7 @@ cpu3: cpu@300 {
> >                       device_type = "cpu";
> >                       compatible = "arm,cortex-a55";
> >                       reg = <0x0 0x300>;
> > +                     #cooling-cells = <2>;
> >                       enable-method = "psci";
> >                       operating-points-v2 = <&cpu0_opp_table>;
> >               };
> > @@ -774,6 +778,73 @@ uart9: serial@fe6d0000 {
> >               status = "disabled";
> >       };
> >
> > +     thermal_zones: thermal-zones {
> > +             cpu_thermal: cpu-thermal {
> > +                     polling-delay-passive = <100>;
> > +                     polling-delay = <1000>;
> > +
> > +                     thermal-sensors = <&tsadc 0>;
> > +
> > +                     trips {
> > +                             cpu_alert0: cpu_alert0 {
> > +                                     temperature = <70000>;
> > +                                     hysteresis = <2000>;
> > +                                     type = "passive";
> > +                             };
> > +                             cpu_alert1: cpu_alert1 {
> > +                                     temperature = <75000>;
> > +                                     hysteresis = <2000>;
> > +                                     type = "passive";
> > +                             };
> > +                             cpu_crit: cpu_crit {
> > +                                     temperature = <95000>;
> > +                                     hysteresis = <2000>;
> > +                                     type = "critical";
> > +                             };
> > +                     };
> > +
> > +                     cooling-maps {
> > +                             map0 {
> > +                                     trip = <&cpu_alert0>;
> > +                                     cooling-device =
> > +                                             <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > +                                             <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > +                                             <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> > +                                             <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> > +                             };
> > +                     };
> > +             };
> > +
> > +             gpu_thermal: gpu-thermal {
> > +                     polling-delay-passive = <20>; /* milliseconds */
> > +                     polling-delay = <1000>; /* milliseconds */
> > +
> > +                     thermal-sensors = <&tsadc 1>;
> > +             };
> > +     };
> > +
> > +     tsadc: tsadc@fe710000 {
> > +             compatible = "rockchip,rk3568-tsadc";
> > +             reg = <0x0 0xfe710000 0x0 0x100>;
> > +             interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
> > +             assigned-clocks = <&cru CLK_TSADC_TSEN>, <&cru CLK_TSADC>;
> > +             assigned-clock-rates = <17000000>, <700000>;
> > +             clocks = <&cru CLK_TSADC>, <&cru PCLK_TSADC>;
> > +             clock-names = "tsadc", "apb_pclk";
> > +             resets = <&cru SRST_TSADC>, <&cru SRST_P_TSADC>,
> > +                      <&cru SRST_TSADCPHY>;
> > +             reset-names = "tsadc", "tsadc-apb", "tsadc-phy";
> > +             rockchip,grf = <&grf>;
> > +             rockchip,hw-tshut-temp = <95000>;
> > +             rockchip,hw-tshut-mode = <1>; /* tshut mode 0:CRU 1:GPIO */
> > +             rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
> > +             pinctrl-names = "gpio", "otpout";
> > +             pinctrl-0 = <&tsadc_gpio>;
> > +             pinctrl-1 = <&tsadc_shutorg>;
>
> The mainline thermal driver doesn't specify these pinctrl states at all.
>
> Heiko

Oh, yes this seems to be the case.

Is this something that should get fixed?
In practice it likely won't ever cause problems, but in theory if
someone changed the pinmux mode it could break it.

>
> > +             #thermal-sensor-cells = <1>;
> > +             status = "disabled";
> > +     };
> > +
> >       saradc: saradc@fe720000 {
> >               compatible = "rockchip,rk3568-saradc", "rockchip,rk3399-saradc";
> >               reg = <0x0 0xfe720000 0x0 0x100>;
> >
>
>
>
>