Re: [PATCH v3 2/4] pinctrl: renesas: Add RZ/G2L pin and gpio controller driver

[Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>]

Hi Prabhakar,

On Wed, Jul 21, 2021 at 9:16 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> wrote:
> Add support for pin and gpio controller driver for RZ/G2L SoC.
>
> Based on a patch in the BSP by Hien Huynh <hien.huynh.px@xxxxxxxxxxx>.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> Reviewed-by: Biju Das <biju.das.jz@xxxxxxxxxxxxxx>

Thanks for the update!

> --- /dev/null
> +++ b/drivers/pinctrl/renesas/pinctrl-rzg2l.c

> +#define RZG2L_MPXED_PIN_FUNCS          (PIN_CFG_IOLH | \
> +                                        PIN_CFG_SR | \
> +                                        PIN_CFG_PUPD | \
> +                                        PIN_CFG_FILONOFF | \
> +                                        PIN_CFG_FILNUM | \
> +                                        PIN_CFG_FILCLKSEL)
> +
> +#define RZG2L_MPXED_ETH_PIN_FUNCS(x)   ((x) | \
> +                                        PIN_CFG_FILONOFF | \
> +                                        PIN_CFG_FILNUM | \
> +                                        PIN_CFG_FILCLKSEL)

I thought you were going for MULTI? ;-)

> +
> +/*
> + * n indicates number of pins in the port, a is the register index
> + * and f is pin configuration capabilities supported.
> + */
> +#define RZG2L_GPIO_PORT_PACK(n, a, f)  (((n) << 28) | ((a) << 20) | (f))
> +#define RZG2L_GPIO_PORT_GET_PINCNT(x)  (((x) >> 28) & 0x7)
> +#define RZG2L_GPIO_PORT_GET_INDEX(x)   ((((x) & GENMASK(27, 20)) >> 20) & 0x7f)

Actually the "& 0x7f" can be removed, too, if you adjust the mask:

    (((x) & GENMASK(26, 20)) >> 20)

> +#define RZG2L_GPIO_PORT_GET_CFGS(x)    ((x) & GENMASK(19, 0))
> +
> +/*
> + * BIT(31) indicates dedicated pin, p is the register index while
> + * referencing to SR/IEN/IOLH/FILxx registers, b is the register bits
> + * (b * 8) and f is the pin configuration capabilities supported.
> + */
> +#define RZG2L_SINGLE_PIN               BIT(31)
> +#define RZG2L_SINGLE_PIN_PACK(p, b, f) (RZG2L_SINGLE_PIN | \
> +                                        ((p) << 24) | ((b) << 20) | (f))
> +#define RZG2L_SINGLE_PIN_GET_PORT(x)   (((x) >> 24) & 0x7f)
> +#define RZG2L_SINGLE_PIN_GET_BIT(x)    ((((x) & GENMASK(23, 20)) >> 20) & 0x7)

Likewise:

    (((x) & GENMASK(22, 20)) >> 20)

> +#define RZG2L_SINGLE_PIN_GET_CFGS(x)   ((x) & GENMASK(19, 0))

> +       struct rzg2l_pinctrl *pctrl = pinctrl_dev_get_drvdata(pctldev);
> +       struct function_desc *func;
> +       unsigned int i, *psel_val;
> +       struct group_desc *group;
> +       unsigned long data;
> +       int *pins;
> +
> +       func = pinmux_generic_get_function(pctldev, func_selector);
> +       if (!func)
> +               return -EINVAL;
> +       group = pinctrl_generic_get_group(pctldev, group_selector);
> +       if (!group)
> +               return -EINVAL;
> +
> +       psel_val = func->data;
> +       pins = group->pins;
> +       data = (unsigned long)group->data;

Lkp reports data is unused.
Which matches with passing NULL as the last parameter of
pinctrl_generic_add_group().

> +
> +       for (i = 0; i < group->num_pins; i++) {
> +               dev_dbg(pctrl->dev, "port:%u pin: %u PSEL:%u\n",
> +                       RZG2L_PIN_ID_TO_PORT(pins[i]), RZG2L_PIN_ID_TO_PIN(pins[i]),
> +                       psel_val[i]);
> +               rzg2l_pinctrl_set_pfc_mode(pctrl, RZG2L_PIN_ID_TO_PORT(pins[i]),
> +                                          RZG2L_PIN_ID_TO_PIN(pins[i]), psel_val[i]);
> +       }
> +
> +       return 0;
> +};

Gr{oetje,eeting}s,

                        Geert

-- 
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds