Re: [PATCH v6 0/9] ASPEED sgpio driver enhancement.

[Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>]

On Mon, Jul 12, 2021 at 12:03 PM Steven Lee <steven_lee@xxxxxxxxxxxxxx> wrote:
>
> AST2600 SoC has 2 SGPIO master interfaces one with 128 pins another one
> with 80 pins, AST2500/AST2400 SoC has 1 SGPIO master interface that
> supports up to 80 pins.
> In the current driver design, the max number of sgpio pins is hardcoded
> in macro MAX_NR_HW_SGPIO and the value is 80.
>
> For supporting sgpio master interfaces of AST2600 SoC, the patch series
> contains the following enhancement:
> - Convert txt dt-bindings to yaml.
> - Update aspeed-g6 dtsi to support the enhanced sgpio.
> - Support muiltiple SGPIO master interfaces.
> - Support up to 128 pins by dts ngpios property.
> - Pair input/output GPIOs instead of using 0 as GPIO input pin base and
>   MAX_NR_HW_SGPIO as GPIO output pin base.
> - Support wdt reset tolerance.
> - Fix irq_chip issues which causes multiple sgpio devices use the same
>   irq_chip data.
> - Replace all of_*() APIs with device_*().
>
> Changes from v5:
> * Squash v5 patch-05 and patch-06 to one patch.
> * Remove MAX_NR_HW_SGPIO and corresponding design to make the gpio
>   input/output pin base are determined by ngpios.
>   For example, if MAX_NR_HW_SGPIO is 80 and ngpios is 10, the original
>   pin order is as follows:
>     Input:
>     0 1 2 3 ... 9
>     Output:
>     80 81 82 ... 89
>
>   With the new design, pin order is changed as follows:
>     Input:
>     0 2 4 6 ... 18(ngpios * 2 - 2)
>     Output:
>     1 3 5 7 ... 19(ngpios * 2 - 1)
> * Replace ast2600-sgpiom-128 and ast2600-sgpiom-80 compatibles by
>   ast2600-sgpiom.
> * Fix coding style issues.
>
> Changes from v4:
> * Remove ngpios from dtsi
> * Add ast2400 and ast2500 platform data.
> * Remove unused macros.
> * Add ngpios check in a separate patch.
> * Fix coding style issues.
>
> Changes from v3:
> * Split dt-bindings patch to 2 patches
> * Rename ast2600-sgpiom1 compatible with ast2600-sgiom-128
> * Rename ast2600-sgpiom2 compatible with ast2600-sgiom-80
> * Correct the typo in commit messages.
> * Fix coding style issues.
> * Replace all of_*() APIs with device_*().
>
> Changes from v2:
> * Remove maximum/minimum of ngpios from bindings.
> * Remove max-ngpios from bindings and dtsi.
> * Remove ast2400-sgpiom and ast2500-sgpiom compatibles from dts and
>   driver.
> * Add ast2600-sgpiom1 and ast2600-sgpiom2 compatibles as their max
>   number of available gpio pins are different.
> * Modify functions to pass aspeed_sgpio struct instead of passing
>   max_ngpios.
> * Split sgpio driver patch to 3 patches
>
> Changes from v1:
> * Fix yaml format issues.
> * Fix issues reported by kernel test robot.
>
> Please help to review.
>
> Thanks,
> Steven
>
> Steven Lee (9):
>   dt-bindings: aspeed-sgpio: Convert txt bindings to yaml.
>   dt-bindings: aspeed-sgpio: Add ast2600 sgpio
>   ARM: dts: aspeed-g6: Add SGPIO node.
>   ARM: dts: aspeed-g5: Remove ngpios from sgpio node.
>   gpio: gpio-aspeed-sgpio: Add AST2600 sgpio support
>   gpio: gpio-aspeed-sgpio: Add set_config function
>   gpio: gpio-aspeed-sgpio: Move irq_chip to aspeed-sgpio struct
>   gpio: gpio-aspeed-sgpio: Use generic device property APIs
>   gpio: gpio-aspeed-sgpio: Return error if ngpios is not multiple of 8.
>
>  .../bindings/gpio/aspeed,sgpio.yaml           |  77 ++++++++
>  .../devicetree/bindings/gpio/sgpio-aspeed.txt |  46 -----
>  arch/arm/boot/dts/aspeed-g5.dtsi              |   1 -
>  arch/arm/boot/dts/aspeed-g6.dtsi              |  28 +++
>  drivers/gpio/gpio-aspeed-sgpio.c              | 178 +++++++++++-------
>  5 files changed, 215 insertions(+), 115 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/gpio/aspeed,sgpio.yaml
>  delete mode 100644 Documentation/devicetree/bindings/gpio/sgpio-aspeed.txt
>
> --
> 2.17.1
>

The series looks good to me. Can the DTS and GPIO patches go into
v5.15 separately?

Bart