[PATCH 00/10] gpio: msc313: Add gpio support for ssd20xd

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This is a little series to add a compatible string for the Sigmastar
SSD201 and SSD202D to the msc313 gpio driver, add the specific offsets
for the pins on these chips, and then a bunch of DT wiring stuff so
that the LEDs on the M5 stack unitv2 work and it can control the
power switch for the USB connected.

Daniel Palmer (10):
  dt-bindings: gpio: msc313: Add compatible for ssd20xd
  dt-bindings: gpio: msc313: Add offsets for ssd20xd
  gpio: msc313: Code clean ups
  gpio: msc313: Add support for SSD201 and SSD202D
  ARM: dts: mstar: Set gpio compatible for ssd20xd
  ARM: dts: mstar: unitv2: Wire up LEDs
  ARM: dts: mstar: unitv2: Add core regulator
  ARM: dts: mstar: unitv2: Add io regulator
  ARM: dts: mstar: unitv2: Add DRAM regulator
  ARM: dts: mstar: unitv2: Add wifi switch

 .../bindings/gpio/mstar,msc313-gpio.yaml      |   4 +-
 .../dts/mstar-infinity2m-ssd202d-unitv2.dts   |  46 +++
 .../boot/dts/mstar-infinity2m-ssd20xd.dtsi    |   5 +
 drivers/gpio/gpio-msc313.c                    | 266 +++++++++++++++++-
 include/dt-bindings/gpio/msc313-gpio.h        |  71 +++++
 5 files changed, 387 insertions(+), 5 deletions(-)

-- 
2.32.0




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux