Re: [RFC PATH 2/2] gpio: starfive-jh7100: Add StarFive JH7100 GPIO driver

[Bin Meng <bmeng.cn@xxxxxxxxx>]

On Thu, Jul 1, 2021 at 8:23 AM Drew Fustini <drew@xxxxxxxxxxxxxxx> wrote:
>
> Add GPIO driver for the StarFive JH7100 SoC [1] used on the
> BeagleV Starlight JH7100 board [2].
>
> [1] https://github.com/starfive-tech/beaglev_doc/
> [2] https://github.com/beagleboard/beaglev-starlight
>
> Signed-off-by: Emil Renner Berthing <kernel@xxxxxxxx>
> Signed-off-by: Huan Feng <huan.feng@xxxxxxxxxxxxxxxx>
> Signed-off-by: Drew Fustini <drew@xxxxxxxxxxxxxxx>
> ---
>  MAINTAINERS                         |   8 +
>  drivers/gpio/Kconfig                |   8 +
>  drivers/gpio/Makefile               |   1 +
>  drivers/gpio/gpio-starfive-jh7100.c | 425 ++++++++++++++++++++++++++++
>  4 files changed, 442 insertions(+)
>  create mode 100644 drivers/gpio/gpio-starfive-jh7100.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index bc0ceef87b73..04fccc2ceffa 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -17423,6 +17423,14 @@ S:     Supported
>  T:     git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging.git
>  F:     drivers/staging/
>
> +SIFVE JH7100 SOC GPIO DRIVER

typo of SIFIVE, but it should be STARFIVE

> +M:     Drew Fustini <drew@xxxxxxxxxxxxxxx>
> +M:     Huan Feng <huan.feng@xxxxxxxxxxxxxxxx>
> +L:     linux-riscv@xxxxxxxxxxxxxxxxxxx
> +L:     linux-gpio@xxxxxxxxxxxxxxx
> +F:     Documentation/devicetree/bindings/gpio/starfive,jh7100-gpio.yaml
> +F:     drivers/gpio/gpio-starfive-jh7100.c
> +

[snip]

Regards,
Bin