[RFC PATH 0/2] gpio: starfive-jh7100: Add StarFive JH7100 GPIO bindings and driver

[Drew Fustini <drew@xxxxxxxxxxxxxxx>]

Add device tree bindings and driver for the GPIO controller in the
StarFive JH7100 SoC [1] used on the BeagleV Starlight JH7100 board [2].

The dts using "starfive,jh7100-gpio" is in StarFive's linux repo [3] and
is being cleaned up in preperation for submission.

[1] https://github.com/starfive-tech/beaglev_doc
[2] https://github.com/beagleboard/beaglev-starlight
[3] https://github.com/starfive-tech/linux/blob/beaglev/arch/riscv/boot/dts/starfive/jh7100.dtsi#L262

Drew Fustini (2):
  dt-bindings: gpio: add starfive,jh7100-gpio bindings
  gpio: starfive-jh7100: Add StarFive JH7100 GPIO driver

 .../bindings/gpio/starfive,jh7100-gpio.yaml   |  60 +++
 MAINTAINERS                                   |   8 +
 drivers/gpio/Kconfig                          |   8 +
 drivers/gpio/Makefile                         |   1 +
 drivers/gpio/gpio-starfive-jh7100.c           | 425 ++++++++++++++++++
 5 files changed, 502 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/gpio/starfive,jh7100-gpio.yaml
 create mode 100644 drivers/gpio/gpio-starfive-jh7100.c

-- 
2.27.0