Re: [PATCH 4/8] dt-bindings: pinctrl: Add Nuvoton WPCM450

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Jun 02, 2021 at 02:03:25PM +0200, Jonathan Neuschäfer wrote:
> This binding is heavily based on the one for NPCM7xx, because the
> hardware is similar. One notable difference is that there are no
> sub-nodes for GPIO banks, because the GPIO registers are arranged
> differently.
> 
> Certain pins support blink patterns in hardware. This is currently not
> modelled in the DT binding.
> 
> Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
> ---
>  .../pinctrl/nuvoton,wpcm450-pinctrl.yaml      | 142 ++++++++++++++++++
>  1 file changed, 142 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml
> new file mode 100644
> index 0000000000000..0664fe2b90db6
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/nuvoton,wpcm450-pinctrl.yaml
> @@ -0,0 +1,142 @@
> +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/nuvoton,wpcm450-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Nuvoton WPCM450 pin control and GPIO
> +
> +maintainers:
> +  - Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
> +
> +properties:
> +  compatible:
> +    const: "nuvoton,wpcm450-pinctrl"

Don't need quotes.

> +
> +  reg:
> +    maxItems: 1
> +
> +  gpio-controller: true
> +
> +  '#gpio-cells':
> +    const: 2
> +
> +  interrupt-controller: true
> +
> +  "#interrupt-cells":
> +    const: 2
> +
> +  interrupts: true
> +
> +patternProperties:
> +  # There are two kinds of subnodes:
> +  # 1. a pinmux node configures pin muxing for a group of pins (e.g. rmii2)
> +  # 2. a pinctrl node configures properties of a single pin
> +  "^.*$":
> +    if:
> +      type: object
> +    then:

Don't do this hack for new bindings. Pick a node name pattern you can 
match on.

> +      allOf:
> +        - $ref: pincfg-node.yaml#
> +        - $ref: pinmux-node.yaml#
> +      properties:
> +        groups:
> +          description:
> +            One or more groups of pins to mux to a certain function
> +          minItems: 1
> +          items:
> +            enum: [ smb3, smb4, smb5, scs1, scs2, scs3, smb0, smb1, smb2, bsp,
> +                    hsp1, hsp2, r1err, r1md, rmii2, r2err, r2md, kbcc, dvo,
> +                    clko, smi, uinc, gspi, mben, xcs2, xcs1, sdio, sspi, fi0,
> +                    fi1, fi2, fi3, fi4, fi5, fi6, fi7, fi8, fi9, fi10, fi11,
> +                    fi12, fi13, fi14, fi15, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5,
> +                    pwm6, pwm7, hg0, hg1, hg2, hg3, hg4, hg5, hg6, hg7 ]
> +        function:
> +          description:
> +            The function that a group of pins is muxed to
> +          enum: [ smb3, smb4, smb5, scs1, scs2, scs3, smb0, smb1, smb2, bsp,
> +                  hsp1, hsp2, r1err, r1md, rmii2, r2err, r2md, kbcc, dvo0,
> +                  dvo1, dvo2, dvo3, dvo4, dvo5, dvo6, dvo7, clko, smi, uinc,
> +                  gspi, mben, xcs2, xcs1, sdio, sspi, fi0, fi1, fi2, fi3, fi4,
> +                  fi5, fi6, fi7, fi8, fi9, fi10, fi11, fi12, fi13, fi14, fi15,
> +                  pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, pwm6, pwm7, hg0, hg1,
> +                  hg2, hg3, hg4, hg5, hg6, hg7 ]
> +
> +        pins:
> +          description:
> +            A list of pins to configure in certain ways, such as enabling
> +            debouncing
> +          minItems: 1
> +          items:
> +            enum: [ gpio0, gpio1, gpio2, gpio3, gpio4, gpio5, gpio6, gpio7,
> +                    gpio8, gpio9, gpio10, gpio11, gpio12, gpio13, gpio14,
> +                    gpio15, gpio16, gpio17, gpio18, gpio19, gpio20, gpio21,
> +                    gpio22, gpio23, gpio24, gpio25, gpio26, gpio27, gpio28,
> +                    gpio29, gpio30, gpio31, gpio32, gpio33, gpio34, gpio35,
> +                    gpio36, gpio37, gpio38, gpio39, gpio40, gpio41, gpio42,
> +                    gpio43, gpio44, gpio45, gpio46, gpio47, gpio48, gpio49,
> +                    gpio50, gpio51, gpio52, gpio53, gpio54, gpio55, gpio56,
> +                    gpio57, gpio58, gpio59, gpio60, gpio61, gpio62, gpio63,
> +                    gpio64, gpio65, gpio66, gpio67, gpio68, gpio69, gpio70,
> +                    gpio71, gpio72, gpio73, gpio74, gpio75, gpio76, gpio77,
> +                    gpio78, gpio79, gpio80, gpio81, gpio82, gpio83, gpio84,
> +                    gpio85, gpio86, gpio87, gpio88, gpio89, gpio90, gpio91,
> +                    gpio92, gpio93, gpio94, gpio95, gpio96, gpio97, gpio98,
> +                    gpio99, gpio100, gpio101, gpio102, gpio103, gpio104,
> +                    gpio105, gpio106, gpio107, gpio108, gpio109, gpio110,
> +                    gpio111, gpio112, gpio113, gpio114, gpio115, gpio116,
> +                    gpio117, gpio118, gpio119, gpio120, gpio121, gpio122,
> +                    gpio123, gpio124, gpio125, gpio126, gpio127 ]
> +
> +        input-debounce: true
> +        phandle: true

Needing this should be fixed now.

> +
> +      dependencies:
> +        groups: [ function ]
> +        function: [ groups ]
> +
> +      additionalProperties: false
> +
> +required:
> +  - compatible
> +  - reg
> +  - gpio-controller
> +  - '#gpio-cells'
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    #include <dt-bindings/gpio/gpio.h>
> +    pinctrl: pinctrl@b8003000 {
> +      compatible = "nuvoton,wpcm450-pinctrl";
> +      reg = <0xb8003000 0x1000>;
> +      gpio-controller;
> +      #gpio-cells = <2>;
> +      interrupts = <2 IRQ_TYPE_LEVEL_HIGH
> +                    3 IRQ_TYPE_LEVEL_HIGH
> +                    4 IRQ_TYPE_LEVEL_HIGH
> +                    5 IRQ_TYPE_LEVEL_HIGH>;
> +      rmii2 {
> +        groups = "rmii2";
> +        function = "rmii2";
> +      };
> +
> +      pinctrl_uid: uid {
> +        pins = "gpio14";
> +        input-debounce = <1>;
> +      };
> +    };
> +
> +    gpio-keys {
> +      compatible = "gpio-keys";
> +      pinctrl-names = "default";
> +      pinctrl-0 = <&pinctrl_uid>;
> +
> +      uid {
> +        label = "UID";
> +        linux,code = <102>;
> +        gpios = <&pinctrl 14 GPIO_ACTIVE_HIGH>;
> +      };
> +    };
> --
> 2.30.2



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux