Hello Drew, On Wed, 1 Jul 2020 03:33:20 +0200 Drew Fustini <drew@xxxxxxxxxxxxxxx> wrote: > Increase #pinctrl-cells to 2 so that mux and conf be kept separate. This > requires the AM33XX_PADCONF macro in omap.h to also be modified to keep pin > conf and pin mux values separate. > > Signed-off-by: Drew Fustini <drew@xxxxxxxxxxxxxxx> > --- > arch/arm/boot/dts/am33xx-l4.dtsi | 2 +- > include/dt-bindings/pinctrl/omap.h | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm/boot/dts/am33xx-l4.dtsi b/arch/arm/boot/dts/am33xx-l4.dtsi > index a9cbefc80c0c..3141590e5889 100644 > --- a/arch/arm/boot/dts/am33xx-l4.dtsi > +++ b/arch/arm/boot/dts/am33xx-l4.dtsi > @@ -278,7 +278,7 @@ scm: scm@0 { > am33xx_pinmux: pinmux@800 { > compatible = "pinctrl-single"; > reg = <0x800 0x238>; > - #pinctrl-cells = <1>; > + #pinctrl-cells = <2>; > pinctrl-single,register-width = <32>; > pinctrl-single,function-mask = <0x7f>; > }; > diff --git a/include/dt-bindings/pinctrl/omap.h b/include/dt-bindings/pinctrl/omap.h > index 625718042413..2d2a8c737822 100644 > --- a/include/dt-bindings/pinctrl/omap.h > +++ b/include/dt-bindings/pinctrl/omap.h > @@ -65,7 +65,7 @@ > #define DM814X_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val) > #define DM816X_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val) > #define AM33XX_IOPAD(pa, val) OMAP_IOPAD_OFFSET((pa), 0x0800) (val) > -#define AM33XX_PADCONF(pa, dir, mux) OMAP_IOPAD_OFFSET((pa), 0x0800) ((dir) | (mux)) > +#define AM33XX_PADCONF(pa, conf, mux) OMAP_IOPAD_OFFSET((pa), 0x0800) (conf) (mux) > > /* > * Macros to allow using the offset from the padconf physical address > -- > 2.25.1 Based on the bindings doc a value of 2 is only acceptable if one uses pinctrl-single,bits but all the am33xx pins still uses pinctrl-single,pins. I noticed this because this breaks FreeBSD when I tried with 5.9 dts. -- Emmanuel Vadot <manu@xxxxxxxxxxxxxxxx> <manu@xxxxxxxxxxx>