[PATCH 2/2] pinctrl: sunxi: sun50i-h5 use platform_irq_count

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Peng Fan <peng.fan@xxxxxxx>

platform_irq_count() is the more generic way (independent of
device trees) to determine the count of available interrupts. So
use this instead.

As platform_irq_count() might return an error code (which
of_irq_count doesn't) some additional handling is necessary.

Signed-off-by: Peng Fan <peng.fan@xxxxxxx>
---
 drivers/pinctrl/sunxi/pinctrl-sun50i-h5.c | 13 +++++++++++--
 1 file changed, 11 insertions(+), 2 deletions(-)

diff --git a/drivers/pinctrl/sunxi/pinctrl-sun50i-h5.c b/drivers/pinctrl/sunxi/pinctrl-sun50i-h5.c
index a78d7b922ef4..31d62bbb7f43 100644
--- a/drivers/pinctrl/sunxi/pinctrl-sun50i-h5.c
+++ b/drivers/pinctrl/sunxi/pinctrl-sun50i-h5.c
@@ -19,7 +19,6 @@
 #include <linux/platform_device.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
-#include <linux/of_irq.h>
 #include <linux/pinctrl/pinctrl.h>
 
 #include "pinctrl-sunxi.h"
@@ -549,7 +548,17 @@ static const struct sunxi_pinctrl_desc sun50i_h5_pinctrl_data = {
 
 static int sun50i_h5_pinctrl_probe(struct platform_device *pdev)
 {
-	switch (of_irq_count(pdev->dev.of_node)) {
+	int ret;
+
+	ret = platform_irq_count(pdev);
+	if (ret < 0) {
+		if (ret != -EPROBE_DEFER)
+			dev_err(&pdev->dev, "Couldn't determine irq count: %pe\n",
+				ERR_PTR(ret));
+		return ret;
+	}
+
+	switch (ret) {
 	case 2:
 		dev_warn(&pdev->dev,
 			 "Your device tree's pinctrl node is broken, which has no IRQ of PG bank routed.\n");
-- 
2.16.4





[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux