[PATCH] gpio: mxc: Only getting second IRQ when there is more than one IRQ

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On some of i.MX SoCs like i.MX8QXP, there is ONLY one IRQ for each
GPIO bank, so it is better to check the IRQ count before getting
second IRQ to avoid below error message during probe:

[    1.070908] gpio-mxc 5d080000.gpio: IRQ index 1 not found
[    1.077420] gpio-mxc 5d090000.gpio: IRQ index 1 not found
[    1.083766] gpio-mxc 5d0a0000.gpio: IRQ index 1 not found
[    1.090122] gpio-mxc 5d0b0000.gpio: IRQ index 1 not found
[    1.096470] gpio-mxc 5d0c0000.gpio: IRQ index 1 not found
[    1.102804] gpio-mxc 5d0d0000.gpio: IRQ index 1 not found
[    1.109144] gpio-mxc 5d0e0000.gpio: IRQ index 1 not found
[    1.115475] gpio-mxc 5d0f0000.gpio: IRQ index 1 not found

Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
---
 drivers/gpio/gpio-mxc.c | 12 +++++++++---
 1 file changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/gpio/gpio-mxc.c b/drivers/gpio/gpio-mxc.c
index 7907a87..39ba7dd 100644
--- a/drivers/gpio/gpio-mxc.c
+++ b/drivers/gpio/gpio-mxc.c
@@ -426,9 +426,15 @@ static int mxc_gpio_probe(struct platform_device *pdev)
 	if (IS_ERR(port->base))
 		return PTR_ERR(port->base);
 
-	port->irq_high = platform_get_irq(pdev, 1);
-	if (port->irq_high < 0)
-		port->irq_high = 0;
+	err = platform_irq_count(pdev);
+	if (err < 0)
+		return err;
+
+	if (err > 1) {
+		port->irq_high = platform_get_irq(pdev, 1);
+		if (port->irq_high < 0)
+			port->irq_high = 0;
+	}
 
 	port->irq = platform_get_irq(pdev, 0);
 	if (port->irq < 0)
-- 
2.7.4




[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux