Re: [PATCH 08/18] clk: bcm2835: Add BCM2711_CLOCK_EMMC2 support

[Matthias Brugger <mbrugger@xxxxxxxx>]

On 22/07/2019 07:54, Stefan Wahren wrote:
> The new BCM2711 supports an additional clock for the emmc2 block.
> So add a new compatible and register this clock only for BCM2711.
> 
> Signed-off-by: Stefan Wahren <wahrenst@xxxxxxx>

Reviewed-by: Matthias Brugger <mbrugger@xxxxxxxx>

> ---
>  drivers/clk/bcm/clk-bcm2835.c | 16 +++++++++++++++-
>  1 file changed, 15 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c
> index 3231b76..fbdc4e1 100644
> --- a/drivers/clk/bcm/clk-bcm2835.c
> +++ b/drivers/clk/bcm/clk-bcm2835.c
> @@ -114,6 +114,8 @@
>  #define CM_AVEODIV		0x1bc
>  #define CM_EMMCCTL		0x1c0
>  #define CM_EMMCDIV		0x1c4
> +#define CM_EMMC2CTL		0x1d0
> +#define CM_EMMC2DIV		0x1d4
> 
>  /* General bits for the CM_*CTL regs */
>  # define CM_ENABLE			BIT(4)
> @@ -290,7 +292,8 @@
>  #define BCM2835_MAX_FB_RATE	1750000000u
> 
>  #define SOC_BCM2835		BIT(0)
> -#define SOC_ALL			(SOC_BCM2835)
> +#define SOC_BCM2711		BIT(1)
> +#define SOC_ALL			(SOC_BCM2835 | SOC_BCM2711)
> 
>  /*
>   * Names of clocks used within the driver that need to be replaced
> @@ -1999,6 +2002,16 @@ static const struct bcm2835_clk_desc clk_desc_array[] = {
>  		.frac_bits = 8,
>  		.tcnt_mux = 39),
> 
> +	/* EMMC2 clock (only available for BCM2711) */
> +	[BCM2711_CLOCK_EMMC2]	= REGISTER_PER_CLK(
> +		SOC_BCM2711,
> +		.name = "emmc2",
> +		.ctl_reg = CM_EMMC2CTL,
> +		.div_reg = CM_EMMC2DIV,
> +		.int_bits = 4,
> +		.frac_bits = 8,
> +		.tcnt_mux = 42),
> +
>  	/* General purpose (GPIO) clocks */
>  	[BCM2835_CLOCK_GP0]	= REGISTER_PER_CLK(
>  		SOC_ALL,
> @@ -2230,6 +2243,7 @@ static int bcm2835_clk_probe(struct platform_device *pdev)
> 
>  static const struct of_device_id bcm2835_clk_of_match[] = {
>  	{ .compatible = "brcm,bcm2835-cprman", .data = (void *)SOC_BCM2835 },
> +	{ .compatible = "brcm,bcm2711-cprman", .data = (void *)SOC_BCM2711 },
>  	{}
>  };
>  MODULE_DEVICE_TABLE(of, bcm2835_clk_of_match);
> --
> 2.7.4
> 
>