Lochnagar is an evaluation and development board for Cirrus Logic Smart CODEC and Amp devices. It allows the connection of most Cirrus Logic devices on mini-cards, as well as allowing connection of various application processor systems to provide a full evaluation platform. This driver supports the board controller chip on the Lochnagar board. Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx> --- .../devicetree/bindings/clock/cirrus,lochnagar.txt | 89 ++++++++++++++++++++++ 1 file changed, 89 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt diff --git a/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt new file mode 100644 index 000000000000..c1b5478d5432 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt @@ -0,0 +1,89 @@ +Cirrus Logic Lochnagar Audio Development Board + +Lochnagar is an evaluation and development board for Cirrus Logic +Smart CODEC and Amp devices. It allows the connection of most Cirrus +Logic devices on mini-cards, as well as allowing connection of +various application processor systems to provide a full evaluation +platform. Audio system topology, clocking and power can all be +controlled through the Lochnagar, allowing the device under test +to be used in a variety of possible use cases. + +This binding document describes the binding for the clock portion of +the driver. + +Also see these documents for generic binding information: + [1] Clock : ../clock/clock-bindings.txt + +And these for relevant defines: + [2] include/dt-bindings/clock/lochnagar.h + +This binding must be part of the Lochnagar MFD binding: + [3] ../mfd/cirrus,lochnagar.txt + +Required properties: + + - compatible : One of the following strings: + "cirrus,lochnagar1-clk" + "cirrus,lochnagar2-clk" + + - #clock-cells : Must be 1. The first cell indicates the clock + number, see [2] for available clocks and [1]. + +Optional properties: + + - clocks : Must contain an entry for each clock in clock-names. + - clock-names : May contain entries for each of the following + clocks: + - ln-cdc-clkout : Output clock from CODEC card. + - ln-dsp-clkout : Output clock from DSP card. + - ln-gf-mclk1,ln-gf-mclk2,ln-gf-mclk3,ln-gf-mclk4 : Optional + input audio clocks from host system. + - ln-psia1-mclk, ln-psia2-mclk : Optional input audio clocks from + external connector. + - ln-spdif-clkout : Optional input audio clock from SPDIF. + - ln-adat-clkout : Optional input audio clock from ADAT. + - ln-pmic-32k : On board fixed regulator. + - ln-clk-12m : On board fixed regulator. + - ln-clk-11m : On board fixed regulator. + - ln-clk-24m : On board fixed regulator. + - ln-clk-22m : On board fixed regulator. + - ln-usb-clk-24m : On board fixed regulator. + - ln-usb-clk-12m : On board fixed regulator. + + - assigned-clocks : A list of Lochnagar clocks to be reparented, see + [2] for available clocks. + - assigned-clock-parents : Parents to be assigned to the clocks + listed in "assigned-clocks". + +Optional sub-nodes: + + - fixed-clock nodes may be registered for the following on board clocks: + - ln-pmic-32k : 32768 kHz + - ln-clk-12m : 12288000 kHz + - ln-clk-11m : 11298600 kHz + - ln-clk-24m : 24576000 kHz + - ln-clk-22m : 22579200 kHz + - ln-usb-clk-24m : 24576000 kHz + - ln-usb-clk-12m : 12288000 kHz + +Example: + +lochnagar-clk { + compatible = "cirrus,lochnagar2-clk"; + + #clock-cells = <1>; + + clocks = <&clk-audio>, <&clk_pmic>; + clock-names = "ln-gf-mclk2", "ln-pmic-32k"; + + assigned-clocks = <&lochnagar-clk LOCHNAGAR_CDC_MCLK1>, + <&lochnagar-clk LOCHNAGAR_CDC_MCLK2>; + assigned-clock-parents = <&clk-audio>, + <&clk-pmic>; + + clk-pmic: clk-pmic { + compatible = "fixed-clock"; + clock-cells = <0>; + clock-frequency = <32768>; + }; +}; -- 2.11.0