Re: [PATCH 1/3] ARM: davinci: define gpio interrupts as separate resources

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 13/11/18 7:20 PM, Bartosz Golaszewski wrote:
> From: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>
> 
> Since commit eb3744a2dd01 ("gpio: davinci: Do not assume continuous
> IRQ numbering") the davinci GPIO driver fails to probe if we boot
> in legacy mode from any of the board files. Since the driver now
> expects every interrupt to be defined as a separate resource, split
> the definition in devices-da8xx.c instead of having a single continuous
> interrupt range.
> 
> Fixes: eb3744a2dd01 ("gpio: davinci: Do not assume continuous IRQ numbering")
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx>

There are a number of other boards that need such fixing too. And the
commit in question does not do a good job of explaining why it was
needed in the first place. The description  just repeats what can be
inferred by reading the patch.


    gpio: davinci: Do not assume continuous IRQ numbering

    Currently the driver assumes that the interrupts are continuous
    and does platform_get_irq only once and assumes the rest are continuous,
    instead call platform_get_irq for all the interrupts and store them
    in an array for later use.

    Signed-off-by: Keerthy <j-keerthy@xxxxxx>
    Reviewed-by: Grygorii Strashko <grygorii.strashko@xxxxxx>
    Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>


Can we revert the offending commit instead?

Thanks,
Sekhar



[Index of Archives]     [Linux SPI]     [Linux Kernel]     [Linux ARM (vger)]     [Linux ARM MSM]     [Linux Omap]     [Linux Arm]     [Linux Tegra]     [Fedora ARM]     [Linux for Samsung SOC]     [eCos]     [Linux Fastboot]     [Gcc Help]     [Git]     [DCCP]     [IETF Announce]     [Security]     [Linux MIPS]     [Yosemite Campsites]

  Powered by Linux