This series includes four patches: 1.Add mt2712 pintcrl head file. 2.Add mt2712 pinctrl device node. 3.Add mt2712 pinctrl driver. 4.Support bias-disable of generic and special pins simultaneously. Changes in patch v3: 1)Use SPDX identifiers for all new files. 2)Use right data for Copyright and Author. 3)Correct some spelling mistake. 4)Reusing original logic and change solution to support bias-disable of generic and special pins simultaneously. 5)Add some comments for the speical path of special pins bias-disable. Changes in patch v2: 1)Separate patch4 for supporting bias-disable of generic and special pins. 2)GPIO16~17 direction setting is changed as generic pins in mt2712 E2, So remove GPIO16~17 special direction setting and remove apmixedsys node in pinctrl device node. 3)Add pinmux define in "mt2712-pinfunc.h" and "pinctrl-mtk-mt2712.h" for mt2712 E2 design. Zhiyong Tao (4): arm64: dts: mt2712: add pintcrl file arm64: dts: mt2712: add pintcrl device node. pinctrl: add mt2712 pinctrl driver pintcrl: support bias-disable of generic and special pins simultaneously arch/arm64/boot/dts/mediatek/mt2712-pinfunc.h | 1123 ++++++++++++++ arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 18 + drivers/pinctrl/mediatek/Kconfig | 7 + drivers/pinctrl/mediatek/Makefile | 1 + drivers/pinctrl/mediatek/pinctrl-mt2712.c | 632 ++++++++ drivers/pinctrl/mediatek/pinctrl-mtk-common.c | 6 + drivers/pinctrl/mediatek/pinctrl-mtk-mt2712.h | 1967 +++++++++++++++++++++++++ 7 files changed, 3754 insertions(+) create mode 100644 arch/arm64/boot/dts/mediatek/mt2712-pinfunc.h create mode 100644 drivers/pinctrl/mediatek/pinctrl-mt2712.c create mode 100644 drivers/pinctrl/mediatek/pinctrl-mtk-mt2712.h -- 2.6.4 -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html