On Tue, Feb 20, 2018 at 1:19 PM, Baruch Siach <baruch@xxxxxxxxxx> wrote: > The Raspberry Pi 3 GPIO expander is controlled by the VC4 firmware over > I2C. The firmware mailbox interface allows the ARM core to control the > GPIO lines. > > Signed-off-by: Baruch Siach <baruch@xxxxxxxxxx> > --- > v5: > * Remove the 'firmware' property > * Note that the gpio node is a child of the firmware node This v5 patch applied to the GPIO tree for v4.17 with Rob's ACK. Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH v5 2/5] dt-bindings: gpio: add raspberry pi GPIO expander binding
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: Re: [PATCH v5 2/5] dt-bindings: gpio: add raspberry pi GPIO expander binding
- From: Linus Walleij <linus.walleij@xxxxxxxxxx>
- Date: Thu, 22 Feb 2018 13:49:31 +0100
- In-reply-to: <f400b48cbcd8a138c39d4e8f63d6c1f569090dcc.1519128054.git.baruch@tkos.co.il>
- References: <cover.1519128054.git.baruch@tkos.co.il> <f400b48cbcd8a138c39d4e8f63d6c1f569090dcc.1519128054.git.baruch@tkos.co.il>
- References:
- [PATCH v5 0/5] gpio: driver for the RPi3 GPIO expander
- From: Baruch Siach
- [PATCH v5 2/5] dt-bindings: gpio: add raspberry pi GPIO expander binding
- From: Baruch Siach
- [PATCH v5 0/5] gpio: driver for the RPi3 GPIO expander
- Prev by Date: Re: [PATCH v5 1/5] ARM: bcm2835: sync firmware properties with downstream
- Next by Date: Re: [PATCH v5 3/5] gpio: raspberrypi-exp: Driver for RPi3 GPIO expander via mailbox service
- Previous by thread: Re: [PATCH v5 2/5] dt-bindings: gpio: add raspberry pi GPIO expander binding
- Next by thread: [PATCH v5 4/5] ARM: dts: bcm2835: make the firmware node into a bus
- Index(es):
 |