Re: [PATCH 2/2] pinctrl: rockchip: Fix the correct routing config for the gmac-m1 pins of rmii and rgmii

[Linus Walleij <linus.walleij@xxxxxxxxxx>]

On Sat, Sep 30, 2017 at 5:07 PM, Heiko Stuebner <heiko@xxxxxxxxx> wrote:
> Am Samstag, 30. September 2017, 20:13:21 CEST schrieb David Wu:
>> If the gmac-m1 optimization(bit10) is selected, the gpio function
>> of gmac pins is not valid. We may use the rmii mode for gmac interface,
>> the pins such as rx_d2, rx_d3, which the rgmii mode used, but rmii not
>> used could be taken as gpio function. So gmac_rxd0m1 selects the bit2,
>> and gmac_rxd0m3 select bit10 is more correct.
>>
>> Signed-off-by: David Wu <david.wu@xxxxxxxxxxxxxx>
>
> the patch subject should mention the the rk3328 whose routing gets fixed
> (like adding a simple "on rk3328" to it), otherwise
>
> Reviewed-by: Heiko Stuebner <heiko@xxxxxxxxx>

I added rk3328 to it, also assumed this Reviewed-by covers patch 1/2
as well and applied both with your tag.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe linux-gpio" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html