Hi David, Am Samstag, 30. September 2017, 20:13:21 CEST schrieb David Wu: > If the gmac-m1 optimization(bit10) is selected, the gpio function > of gmac pins is not valid. We may use the rmii mode for gmac interface, > the pins such as rx_d2, rx_d3, which the rgmii mode used, but rmii not > used could be taken as gpio function. So gmac_rxd0m1 selects the bit2, > and gmac_rxd0m3 select bit10 is more correct. > > Signed-off-by: David Wu <david.wu@xxxxxxxxxxxxxx> the patch subject should mention the the rk3328 whose routing gets fixed (like adding a simple "on rk3328" to it), otherwise Reviewed-by: Heiko Stuebner <heiko@xxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html